General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press OPEN button on the panel to open the panel and press RESET button to restore the unit to the original factory settings.
Power button
Press any button on the panel (except OPEN button) or STANDBY button on the RC to turn on the unit. Press and hold PWR/MUTE button on the panel or STANDBY button on the RC to switch the unit off.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status you set.
Volume control
Rotate VOL knob on the panel or press VOL +/- on the RC to adjust the volume level.
Setting the sound characteristics
Press shortly and repeatedly the SEL button to select the audio setting: VOLUME (VOL) => BASS => TREBLE (TRB) => BALANCE (BAL) => FADER (FAD). Rotate VOL knob or press VOL+/- buttons on the RC to regulate each setting.
Note:
If turning off the power all the settings of each mode will be saved.
If turning off the ACC power or reset the unit all the settings will become as they were set on the plant.
If you don’t adjust VOL knob within 6 seconds after selecting the desired setting, the unit will automatically return to the current mode being displayed.
15