Silicon Laboratories manual ToolStick Debug Adapter, Handling Recommendations

Page 1

ToolStick Debug Adapter

TO O L ST I C K DE B U G AD A P T E R US E R S GU I D E

1. Handling Recommendations

To enable development, the ToolStick Base Adapter and daughter cards are distributed without any protective plastics. To prevent damage to the devices and/or the host PC, please take into consideration the following recommendations when using the ToolStick:

„Never connect or disconnect a daughter card to or from the ToolStick Base Adapter while the Base Adapter is connected to a PC.

„Always connect and disconnect the ToolStick from the PC by holding the large plastic connector.

Figure 1. Proper Insertion

„Avoid directly touching any of the other components.

Figure 2. Improper Insertion

„Manipulate mechanical devices on the daughter cards, such as potentiometers, with care to prevent the base adapter or daughter card from accidentally dislodging from their socket.

Rev. 0.1 9/06

Copyright © 2006 by Silicon Laboratories

ToolStick Debug Adapter

Image 1
Contents Handling Recommendations ToolStick Debug AdapterToolStick Debug Adapter Specifications ContentsToolStick Debug Adapter Jumpers Hardware Setup using a ToolStick Debug AdapterConnection Options... in the IDE menu Software Setup using a ToolStick Debug AdapterToolStick Debug Adaper Schematic Contact Information