Humax F1-FOX, NA-FOX, CA-FOX, VA-FOX Changing Services, Volume Control, Soundtrack, Subtitle, GB14

Changing Services

To change services, do in the following sequence:

1.Press the NUMERIC buttons(0~9) on the remote control unit.

2.Press the buttons or buttons.

Or press the RECALL( ), Service-list(OK), EPG( )mode button. To switch between TV and Radio services, press the TV/Radio( )button. To select the previous viewed service, press the RECALL( )button.

Volume Control

To adjust the volume level, use the buttons or buttons. To temporarily stop the volume, press the MUTE( )button.

To cancel mute, press the MUTE( )button again or press the

buttons or buttons.

Soundtrack

When you want to change the audio language of current service, press the GREEN()button firstly.

The on-screen menu is displayed on the top to left side of the screen.

To change the audio language:

1. buttons : Use to select the audio on the left, right or both.

2. buttons : Use to select the audio language you want.

3.OK, EXIT button : When this button is pressed, the Soundtrack OSD will disappear keeping the selected Soundtrack language constant.

When the current service is switched, the audio language returns to the audio language that was selected in previous service. If the returned audio language is invalid, the audio language that you select- ed from the audio language menu has the priority of playback.

Subtitle

When the current broadcasting programme provides subtitle, press the SUBTITLE()button to see the current subtitle language list.

To change the subtitle language:

Use the buttons to select a Subtitle language you want. Press the OK button and the selected language is highlighted and then the Subtitle language you want is displayed on the screen. Press the EXIT button to cancel the Subtitle mode.

GB14