Humax NA-FOX, F1-FOX, CA-FOX, VA-FOX manual System Setting, GB19

Guide of Main Menu

2. Parental Control

You can set a parental guidance rating to each programme in this mode.

1.When the OK button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN code will appear on the centre of screen.

** The default PIN code is 0 0 0 0 .

2.Enter the PIN code on the display window.

(If any problem occurs when entering a PIN code, you cannot switch to the next mode.)

3.Set the parental guidance rating of highlighted censorship classification. The parental level is given as age-based numbers

: no block, 6, 10, 14, 18 and total block.

Enter the PIN code to unlock or lock programmes.

4.To change your PIN code:

•Select the highlighted Old PIN code using the buttons and then enter your Old PIN code.

•Enter a New PIN code in the highlighted New PIN code

using the buttons.

•To verify the New PIN code, re-enter a New PIN code in the highlighted Verify Changed PIN code.

5.When the entered PIN code is correct, then all settings are completed.

(If the PIN code is wrong, the message “PIN code mismatch” will be displayed on the display window. When the OK button is pressed at this time, the Old PIN code is valid and the cursor is located in the first position of this menu.)

3. Installation

This mode allows you to customise, add a new service and displays the state of the STB. Enter the submenus after selecting the Installation mode in the Main Menu.

3-1. System Setting

The System Setting mode supports the STB internal settings according to the connection of the receiver and external units. This mode includes Language Setting, Time Setting,

A/V Output Setting and Other Setting.

GB19