OPERATING INSTRUCTIONS
TO SHRED PAPER:
1.If “EMERGENCY STOP SWITCH” is illuminated, depress button and light will turn off.
2.“POWER ON” light indicates unit is ready to operate.
3.Insert paper into feed slot and photo eye will sense material is present, shredder will process material and automatically shut down.
TO SHRED BOTTLES:
1.If “EMERGENCY STOP SWITCH” is illuminated, depress button and light will turn off.
2.“POWER ON LIGHT” indicates unit is ready to operate.
3.Operator raises feed door.
4.Operator places bottle with lid removed into chamber to be shredded.
5.Operator closes door.
6.Shredder starts, processes material and shuts down automatically.
HOW TO CLEAR A PAPER JAM:
1.The shredder will automatically attempt to clear itself by rotating the knives forward and reverse if too much or too large of a piece of material is in the chamber. This is normal. If this continues for more than 20 – 30 seconds depress the “EMERGENCY STOP SWITCH”.
2.Empty the collection bag if full.
3.Depress and hold “REVERSE SWITCH” the shredder will attempt to back paper out of paper feed slot.
4.If shredder jams in reverse mode, depress and hold “FORWARD SWITCH”.
5.If shredder jams again, alternate slowly depressing the “REVERSE SWITCH” and “FORWARD SWITCH” to attempt to move jammed paper completely through shredder.
6.If you are unable to clear the jam using this method, depress “EMERGENCY STOP SWITCH” and “UNPLUG THE SHREDDER”, remove the collection bag from cabinet and carefully remove any paper extending below the cutting head. Reinsert collection bag and repeat jam clearing procedure.
DANGER:
Because the sensor cannot tell the difference between paper and other objects, this feature can be a hazard. To avoid accidents, depress the “EMERGENCY STOP SWITCH” on the shredder as soon as you are finished.
Remove electric plug from receptacle if shredder will not be used for an extended period.
Page 6