Fellowes 99Ms manual Basic Shredding Operation, Advanced Product Features, Product Maintenance

Page 3

BASIC SHREDDING OPERATION

Continuous operation: Up to 15-minutes maximum

NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 15-minutes will trigger

25-minute cool down period.

PAPER OR CARD

1

Plug in and put disconnect power switch in ON (I) position

234

Press ON (I) to

Feed paper/card

When finished

activate (blue)

straight into paper

shredding set

 

entry and release

to OFF ( )

ADVANCED PRODUCT FEATURES

Patented SafeSense® Technology

SilentShredTechnology

Sleep Mode

Stops shredding immediately when

SilentShred™ noise quality

Energy saving feature shuts down automatically

hands touch the paper opening.

shreds without noisy disruptions.

after 2 minutes of no shredding activity

SAFESENSE® TECHNOLOGY OPERATION

Stops shredding immediately when hands touch the paper opening.

SET-UP AND TESTING

 

 

 

1

2

3

4

Turn the shredder ON

Touch test area and

SafeSense® is active and

If hand is held on SafeSense®

( ) to activate SafeSense®

look for the SafeSense®

working properly

area more than 3 seconds,

 

indicator to illuminate

 

shredder will shut off

For more information about all of Fellowes Advanced Product Features go to www.fellowes.com

SLEEP MODE OPERATION

Energy saving feature shuts down the shredder after 2 minutes of inactivity

WHEN IN SLEEP MODE

1

2

3

 

 

or

In sleep mode

To get out of sleep mode

insert paper

 

touch control panel

 

PRODUCT MAINTENANCE

OILING SHREDDER

CLEANING AUTO-START INFRARED SENSORS

 

All micro-cut shredders require oil for peak performance. If not oiled, a

Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors

machine may experience diminished sheet capacity, intrusive noise when

may become blocked by paper dust causing the motor to run even if there is no paper present.

shredding and could ultimately stop running. To avoid these problems, we

(Note: two paper detection sensors are located in the center of the paper entry).

 

recommend you oil your shredder each time you empty your waste bin.

 

 

 

 

FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE

TO CLEAN THE SENSORS

 

 

 

1

2

1

2

3

4

*Apply oil across entry

Press and hold forward ( )

Turn off and unplug

Locate Auto-start

Dip cotton swab in

Using cotton swab, wipe

 

2-3 seconds

shredder

infared sensor

rubbing alcohol

away any contamination

*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250

 

 

from the paper sensors

 

 

 

TROUBLESHOOTING

Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This indicator will remain illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about the continuous operation and recovery time for this shredder.

Bin Open: The shredder will not run if the bin is open. When illuminated, close the bin to resume shredding.

Bin Full: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 36053.

Remove Paper: When illuminated, press reverse ( ) and remove paper. Reduce paper quantity to an acceptable amount and refeed into paper entry.

SafeSense® Indicator: If hands are too close to the paper entry, the SafeSense® indicator will illuminate and the shredder will stop shredding. If SafeSense®

 

is active for 3 seconds, the shredder will automatically turn off and the user must press the power button on the control panel to resume shredding.

3

 

Image 3
Contents Powershred 99Ms Paper shred size Basic SET UPKEY CapabilitiesBasic Shredding Operation Advanced Product FeaturesProduct Maintenance TroubleshootingCapacités Configuration DE BaseFrançais LégendeEntretien DE L’APPAREIL Opération DE Déchiquetage DE BaseFonctions Avancées DE LA Déchiqueteuse Technologie SafesensemdInstalación Básica EspañolExplicación FuncionesMantenimiento DEL Producto Solución DE ProblemasFuncionamiento Básico DE LA Trituradora Características Avanzadas DEL ProductoQuestions or Concerns?
Related manuals
Manual 4 pages 27.26 Kb

99Ms specifications

The Fellowes 99Ms is a high-performance paper shredder designed to provide optimal security for sensitive information. This state-of-the-art machine is engineered for personal and office use, combining efficiency with advanced technology to make shredding a seamless experience.

One of the standout features of the Fellowes 99Ms is its P-4 security level, which means it shreds paper into micro-cut particles. This enhanced level of shredding provides superior protection against identity theft and data breaches. Paper is cut into tiny confetti-like pieces, making it virtually impossible to reconstruct confidential documents. This makes the Fellowes 99Ms an ideal choice for businesses and individuals who handle sensitive information daily.

Equipped with a powerful motor, the Fellowes 99Ms can shred up to 14 sheets of paper in one go, making it suitable for medium-sized shredding tasks. The shredder operates at a speed of 7 feet per minute, ensuring that users can complete their shredding tasks quickly and efficiently. Additionally, it effortlessly shreds other materials such as credit cards and staples, enhancing its utility.

The Fellowes 99Ms employs advanced safety features, including the SafeSense Technology, which automatically shuts off the shredder when hands touch the feed opening. This critical safety measure prevents accidental injuries, making it a family-friendly option for households with children or pets. Furthermore, it features a 60-minute continuous run time, allowing users to tackle larger shredding jobs without frequent cool-off breaks.

User convenience is prioritized through the easy-to-use interface, which includes a simple power button and reverse function for jam clearance. The shredder is fitted with a large 9-gallon waste bin, which can hold a significant amount of shredded material before needing to be emptied, minimizing the hassle of frequent disposal.

The Fellowes 99Ms also boasts a compact and sleek design, making it an excellent addition to any workspace without occupying too much floor space. Its durability, ease of use, and high-security features make it a reliable choice for anyone prioritizing data protection. Overall, the Fellowes 99Ms sets a high standard in the shredding industry, combining advanced technology with practical functionality.