Fellowes 4850C/4850S Sheet Capacity Sensor, Product Maintenance, Oiling Shredder, Troubleshooting

Page 3

ADVANCED PRODUCT FEATURES

SilentShredTechnology SilentShred™ noise quality shreds without noisy disruptions

SHEET CAPACITY SENSOR

Sheet Capacity Sensor

Helps prevent paper jams by indicating sheet capacity levels during the shredding process

Safety Shield

30

Auto Shut Off

Electronically controlled

After 30 minutes of

 

shield stops shredder

 

inactivity, shredder

when opened for

 

automatically turns off for

advanced safety

 

zero energy consumption

Eliminates frustrating jams by preventing overloads.

R

Electronically measures paper thickness to prevent paper jams:

Up to RED: Too many sheets have been inserted. Automatic reverse of paper.

Up to YELLOW: Maximum sheet capacity.

Up to GREEN: Normal sheet capacity during shredding process.

PRODUCT MAINTENANCE

CLEANING AUTO-START INFRARED SENSORS

Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run even if there is no paper present (Note: two paper detection sensors are

located in the center of the paper entry).

TO CLEAN THE SENSORS

 

 

 

1

2

3

4

Turn off and unplug

Locate Auto-start

Use thin, long-handled brush

Clean any contamination

shredder

infared sensor

to clean sensors. Make sure

from the paper sensors

 

 

brush is clean and dry

 

OILING SHREDDER

All shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.

FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE

1

2

3

R

 

R

 

 

Set to Off (O)

*Apply oil

Set to Reverse (R) 2-3

 

across entry

seconds

*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250

TROUBLESHOOTING

Bin Full Indicator: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 3604101.

Safety Shield Indicator: When flashing alternatively with On/Off () LED, safety shield is open and shredding will stop. To resume shredding, make sure safety shield is closed.

Door Open Indicator: When flashing alternatively with On/Off () LED, safety shield is open. To resume shredding, make sure the door is closed.

Paper Capacity Indicator: When flashing blue, too much paper is inserted. Shredder will automatically stop and reverse paper. See Paper Jam section below.

R Overheat Indicator: When flashing alternatively with On/Off () LED, shredder requires a 10-15, minute cool down period. When () is blue, resume shredding

PAPER JAM

1

When flashing blue, too much paper is inserted. Shredder will automatically stop and reverse paper

2

3

4

 

R

 

Gently pull uncut paper

If necessary, press

Shred 1 sheet of

from paper entry

Reverse (R) to run

paper to clear

 

shredder in reverse and

cutters. Resume

 

then pull uncut paper

normal shredding

 

from shredder

 

3

Image 3
Contents Fortishredtm 4850C/4850S KEY Basic SET UP Basic Shredding OperationEnglish Models 4850C/4850SOiling Shredder Product MaintenanceTroubleshooting Sheet Capacity SensorModèle 4850C/4850S Configuration DE BaseFrançais Capacités ToucheDépannage Maintenance DE BaseCapteur DE Capacité DE Feuilles DE Démarrage AutomatiqueFunciones EspañolExplicación Modelo 4850C/4850SSolución DE Problemas Sensor DE Capacidad DE HojasMantenimiento DEL Producto Garantie Limitée DU Produit Limited Product Warranty