English, SET UP To Test SafeSense Technology

ENGLISH

Model DS-1

H. KEY

A. SafeSense® Technology		E. Step	I. Control switch
(yellow)		F. Disconnect power switch		1.	Auto-On
B. Paper entry		G. See safety instructions		2.	OFF
C. Mesh basket		below	R	3.	Reverse
D. SafeSense® override		H. LED Lights
switch		Overheated (red)
		Standby (green)
Active	Not Active

	E.	Magnetic
	E.	safety interlock
		safety interlock

Lift and remove basket

Breakthrough Safety Technology! SafeSense® stops shredding when hands are too close to the opening.

SET UP — To Test SafeSense® Technology

Shredder comes fully assembled. Remove basket packing material and plug in. Disconnect Power Switch must be in ON (I) position to operate shredder.

Press Auto-On ( )

Touch Test Area

Sensor lights up

CAPABILITIES

Will shred: Paper, small paper clips, credit cards and staples

Will not shred: Continuous forms, adhesive labels, transparencies, newspaper, cardboard, large paper clips, laminates or plastic other than noted above

Paper shred size:
Cross-Cut	3.9 x 35mm

Maximum:
Sheets per pass (Cross-Cut)	13*
Cards per pass	1
Paper width	230mm
*70g, A4 paper at 220-240v, 2.0Amps; heavier paper, humidity or other
than rated voltage may reduce capacity.

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

•Keep away from children and pets. Keep hands away from paper entry. Always set to off or unplug when not in use.

•Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder openings. If object enters top opening, switch to Reverse (R) to back out object.

•Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air on shredder.

•Do not use if damaged or defective. Do not disassemble shredder.

Do not place near or over heat source or water.

•Operation, maintenance, and service requirements are covered in the instruction manual. Read the entire instruction manual before operating shredders.

•This shredder has a Disconnect Power Switch (F) that must be in the ON

(I)position to operate shredder. In case of an emergency move switch to

OFF (O) position. This action will stop shredder immediately.

•Avoid touching exposed cutting blades under shredder head.

•Do not put foreign objects in paper entry.

•Shredder must be plugged into a wall outlet or socket of the voltage and amperage designated on the label. The outlet or socket must be installed near the equipment and easily accessible. Energy converters, transformers, or extension cords should not be used with this product.

•FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.

•For indoor use only.

DS-1 specifications

The Fellowes DS-1 is a highly efficient and compact shredder designed for personal use or small office environments. This machine offers an array of features and modern technologies that enhance its functionality and user experience.

One of the standout features of the Fellowes DS-1 is its ability to shred multiple types of materials beyond just paper. It can handle credit cards, staples, and paper clips, making it a versatile choice for anyone looking to securely dispose of various materials. Its shredding capability is rated at 6 sheets of paper in a single pass, allowing users to quickly and efficiently get rid of sensitive documents in a matter of seconds.

The DS-1 is built with safety in mind. It incorporates a safety lock that prevents unauthorized use, ensuring that only designated users can operate the machine. This feature is particularly beneficial in shared environments where document security is paramount. Additionally, the DS-1 is equipped with a quiet motor that minimizes noise during operation, making it suitable for office settings where maintaining a peaceful atmosphere is essential.

In terms of technology, the Fellowes DS-1 utilizes a cross-cut shredding mechanism. This type of shredding converts documents into small, unreadable pieces, providing a high level of security against identity theft and data breaches. The cross-cut design not only enhances security, but it also reduces the volume of shredded material, allowing for easy disposal and a tidy workspace.

To support heavy usage, the DS-1 features an ample wastebasket that holds a significant amount of shredded paper, minimizing the frequency of emptying. The pull-out bin design makes it convenient to dispose of waste without causing a mess.

Overall, the Fellowes DS-1 is a well-rounded shredder that combines functionality, safety, and user-friendly features. Its compact size makes it ideal for home offices or small workspaces, while the advanced cross-cut technology ensures that confidential documents are disposed of securely. The Fellowes DS-1 stands as a reliable solution for anyone looking to protect their personal or organizational information. With its array of features, this shredder is poised to meet the demands of modern document security needs.