ENGLISH
Model DS-1
SafeSense® Technology (yellow) 
Shredder head 
See safety instructions below 
Mesh basket
SafeSense® override switch
Active | Not active |
Step
Paper entry Disconnect power switch 
Overheated (red)
Standby (green) Control switch
Auto-On (
)
Off
Reverse (R)
Lift and remove basket
Magnetic safety interlock
Breakthrough Safety Technology! SafeSense® stops shredding when hands are too close to the opening.
— To Test SafeSense® Technology
Shredder comes fully assembled. Remove basket packing material and plug in. Disconnect power switch must be in ON ( I ) position to operate shredder.
Press | Touch test area | Sensor lights up |
CAPABILITIES
Will shred: Paper, small paper clips, credit cards and staples
Will not shred: Continuous forms, adhesive labels, transparencies, newspaper, cardboard, large paper clips, laminates or plastic other than noted above
Paper shred size: |
|
5/32” x |
Maximum: |
|
Sheets per pass | .........................................................................................11* |
Cards per pass | 1 |
Paper width | 9”/229mm |
Continuous operation |
*20 lb., 8.5”x11” paper at 120v, 60 Hz, 4.5Amps; heavier paper, humidity or other than rated voltage may reduce capacity.
Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
•Keep away from children and pets. Keep hands away from paper entry. Always unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc.– away from shredder openings. If object enters top opening, press and hold Reverse (R) to back out object.
• Avoid touching exposed blades under
2
• Never use aerosol,
•Do not use if damaged or defective. Do not open shredder head. Do not place near or over heat or water source.
• 11 sheets per pass to avoid jams.
•The