HSM HSM FA 500.2 Proper use, warranty, Safety instructions, Operating controls for your safety

Page 3

FA 500.2

1. Proper use, warranty

The document shredder is designed for destroying paper and cardboard, as well as store cards, credit cards, CD- ROMs and floppy discs. Its sturdy drive mechanism is not damaged by paper clips and staples and is even suitable for shredding whole files and folders.

Our general business conditions are applicable. We pro- vide a one year warranty for the document shredder. The warranty period is 6 months when used in multiple shifts. This warranty excludes wear, damage due to improper handling, natural depreciation, and actions taken by third parties.

2. Safety instructions

Caution:

It is prohibited to operate one only machine of a combination-version machine. Only the combination of document shredder and HSM baling press fulfils the requirements of EN 294 (Safety clearances).

Read the operating manual before starting up the shredder.

Do not remove or modify safety devices which guar- antee the safe operation of the machine.

Observe all safety instructions attached to the ma- chine.

The shredder may not be operated by anyone under 16 years of age.

Carry out inspection and maintenance regularly.

Switch off the shredder, disconnect the power plug and call customer service in the following circum- stances:

-power cables or plugs are damaged

-liquid has entered the shredder

-the shredder has been exposed to rain

-the machine does not work properly despite the operating manual having been observed

-the shredder has been damaged

No platforms or other raised surfaces may be placed near the shredder if they encroach on the specified safety clearances.

Danger of injury

Do not reach into the paper feed opening.

Splinters can cause injury

Wear protective goggles when de- stroying diskettes, CDs and hard credit cards.

Danger of injury during intake

Do not go near the paper feed open- ing with long hair, loose clothing, ties, scarves, necklaces, bracelets etc.

Do not destroy any material which might become tangled, such as tapes, binder ties or foil.

Switch off the shredder and pull out the power plug before moving or cleaning the shredder, or any other task outside its normal scope of use.

Maintenance and service tasks may only be performed by HSM customer service and service engineers of our dealers.

Operating controls for your safety

Emergency stop button

In the event of danger, press the emergency stop button immediately. This switches off the shredder, and stops the cutting block and feed belt.

Main switch (only Solo-version)

In the event of danger, turn the main switch to “0”.

You can secure the main switch in this position with a padlock to prevent restarting.

0702

3

Image 3
Contents English HSM FAContents Main switch only Solo-version Proper use, warrantySafety instructions Operating controls for your safetyOverview Dimensions Transportation, installation Mount the loading table onto the unitMount the oil hose onto the unit Operating and display elements on the keypad Safety switch on the dust tray Start-up and inspecting the safety devicesSwitching on the paper shredder Safety flap on the feed beltStopping the shredder Switching off the shredderMalfunctions Maintenance and careChecking the chain tension twice yearly Greasing the drive chains and cogs twice yearlyIf you need to tighten the chain Tightening the feed belt Cleaning the shredderCleaning the tensioning station monthly Cleaning the conveyor-belt area monthlyTechnical Data Solo Solo 400 Solo 400 0702 Combination 400 V / 50 Hz Kombi 400 0702 Kombi 400 Kombi 400 0702