TV Operation

Press the POWER button to turn on the TV; the POWER indicator will light green.

OPTIONS

AIR: If using a

VHF/UHF

antenna.

CABLE: If using Cable

TV.

Set the AIR/CABLE option as described on page 18.

2 1

Adjust the volume level by pressing the VOLUME UP ❶ or DOWN ❷ button. The volume level will be indicated on the screen by a green numerical display between 0 and 100 where 0 is the lowest setting and 100 is the loudest.

NOTES:

• When TV/CATV is set to TV, only channels up to 69 can be selected. When set to CATV, channels up to 125 can be selected.

• If an invalid channel is selected, the display will revert to the original channel.

1 2

For proper operation, before selecting channels, they must be set into the TV’s program memory, see page 19. Press and release the CHANNEL UP ❶ or DOWN ❷ button. The TV automatically stops at the next channel set into memory. This will not operate if channels are not set into memory.

Direct Program Selection buttons (0 - 9, 100+)

Use these buttons to select a channel. The channel number will appear at the top right corner of the screen.

• For Channels 01 through 99, press the two digits in order.

• For Channels 100 through 125, press the 100 button ❸, then the remaining two digits.

FAQs:

Why do I only receive 69 channels, when my cable goes much higher? AIR/CABLE option must be set to CABLE when using cable, see page 18.

Why are some channels scrambled?

You must subscribe to these channels through your cable company.