Memorex MM1540 manual Introduction, Setup, User Interface Control

Page 5

1. INTRODUCTION

1.1GENERAL INFORMATION

The monitor is a 15.0-inch intelligent LCD monitor with ultra high resolution of up to 1024 x 768. The microprocessor-based design was implemented with the user in mind.

We invite you, the proud new owner of this fine monitor, to read this user’s manual before operating, in order to get the most out of this product.

1.2CHECK LIST

Before using this monitor, please make sure that all the items Listed below are present in your package:

LCD monitor Power cable AC/DC adaptor Manual

Warranty card

2 SETUP

2.1LCD MONITOR SETUP

2.1.1 Power Cable Connection (A)

Plug the power cable into the wall outlet, the other end of the power cable into the AC socket.

2.1.2Signal Cable Connection (B) Connect the VGA cable to the PC’s system.

2.1.3Power On

Turn on the power of both your monitor and your computer.

3. USER INTERFACE CONTROL

There are some switches, power LED and OSD menu on the LCD Monitor. These are to provide the users an easy way to adjust video. A description of these functions is as follows:

3.1OSD CONTROLS

To make any adjustment:

1.Press (MENU/Enter) key to show the OSD menu.

2.Select the item in the menu that you wish to adjust by pressing left & right

5

Image 5
Contents USER’S Guide Important Safety Information Page FCC Class B Radio Frequency Interference Statement User Interface Control SetupIntroduction Front Panel Controls ?? Power LED Display Power ManagementAppendix TroubleshootingOperating Humidity 10% to 85%