Teledyne manual Hardware Setup, 6712FR Refrigerated Sampler Extended Programming

6712FR Refrigerated Sampler Section 5 Extended Programming

5.19 Hardware Setup

RUN “PROGRAM NAME”

PROGRAM

VIEW REPORT

OTHER FUNCTIONS

The hardware setup screens make adjustments to the sampler’s hardware-based features:

• Select Other Functions

MAINTENANCE

MANUAL FUNCTIONS

PROGRAMMING STYLE

HARDWARE

• Select Hardware

5.19.1SDI-12 Sonde Setup

5.19.2Rain Gauge Setup

DO YOU HAVE A

RAIN GAUGE CONNECTED?

YES NO

• Select YES.

RAIN GAUGE:

0.01inch TIP

0.1 mm TIP

•The rain gauges are set up to tip on either .01 inch or .1 mm. Select the desired tip.

• SDI-12 Sonde Setup	• Pager Numbers
• Rain Gauge Setup	•Text Messaging
• I/O Pin Programming	•Refrigerator Temperature
•Dialout Alarms	•Analog Outputs

The 6712 supports SDI-12 sondes. For more information on setting up sondes, refer to Section 6.

With standard programming, the sampler does not record rain gauge readings. However, with extended programming, recording the rain gauge readings and the rain enable option can be turned on or off. Enter the hardware setup and follow the screens to the left in the margin.

When asked if you have a rain gauge connected, select YES to record the rain gauge readings and add RAIN as a sampler enable option. Select the appropriate tip for the rain gauge. The sampler will then create a rain memory partition and update the available sampler enable conditions.

Select NO to disable the readings and the sampler enable option. When you select NO, the sampler removes the rain memory par- tition, leaving the memory space available for other reading types.

5-36