Teledyne manual Clock and Calendar, 6712FR Refrigerated Sampler Programming Introduction

6712FR Refrigerated Sampler Section 3 Programming Introduction

RUN

PROGRAM

VIEW REPORT

OTHER FUNCTIONS

•To see the Quick View screens, select PROGRAM.

↑

SITE DESCRIPTION:

“SITE 29 “

↓

•Use the keypad’s arrow key to select ↓ for the next quick view screen. When ↓ is blinking, press ↵.

•Use the keypad’s arrow key to select ↑ for the previous quick view screen. When ↑ is blinking, press ↵.

•Use the keypad’s arrow key to select the program setting. When the setting is blinking, press ↵ to display the screen used to change the setting.

•Press Stop for the main menu.

•All quick view screens work the same way.

3.4 Clock and Calendar

The following Quick View screens show you how to change the sample volume. Begin by paging through the quick view screens until you see the screen containing the sample volume setting:

↑

200 ml SAMPLES

↓

•Press the arrow key until 200 ml SAMPLES blinks. Then press ↵.

SAMPLE VOLUME:

250 ml (10-1000)

•Type the new sample volume and press ↵.

↑

250 ml SAMPLES

↓

When you change a setting, the sampler stores the new settings and returns to the updated quick view screen. You can repeat this process until all settings shown in the quick view screens have been changed. When you are done, select the screen’s forward arrow to move to the next quick view screen, or press Stop to return to the main menu.

You may have to set the internal clock or calendar. The samplers are shipped with their clocks set to U.S. Central Standard time. If your sampler operates in a different time zone, you will have to reset the clock. The example below shows you how to find the time and date screen.

3-5