Teledyne manual Programming Examples, 6712FR Refrigerated Sampler Standard Programming

6712FR Refrigerated Sampler Section 4 Standard Programming

4.3Programming Examples

Use the arrow key to move between the two choices, feet or meters. When the desired choice is blinking, press ↵. The default unit of length for the Spanish option is meters.

The following table is an example of time-paced sampling. Further details about some of the menu items are provided in later sections.

Table 4-1 Standard Program: Sample Every 15 Minutes, One Sample Per Bottle

1

2

6712 SAMPLER

STANDARD PROGRAMMING

For HELP at any

screen press ? key.

RUN

PROGRAM

VIEW REPORT

OTHER FUNCTIONS

Turn the sampler on by pressing the On/Off key. Press ↵.

This screen disappears on its own after 8 seconds.

The option PROGRAM will be blinking. Press ↵.

3

4

5

6

7

8

9

10

SITE DESCRIPTION:

“FACTORY051“

CHANGE?

YES NO

NUMBER OF BOTTLES:

1 2 4 8 12 24

BOTTLE VOLUME IS 1000 ml (300-30000)

SUCTION LINE LENGTH

IS 10 ft

(3-99)

TIME PACED

FLOW PACED

TIME BETWEEN

SAMPLE EVENTS

0 HOURS, 15 MINUTES

SEQUENTIAL

BOTTLES/SAMPLE

SAMPLES/BOTTLE

RUN CONTINUOUSLY?

YES NO

The option NO will be blinking. Press ↵.

For the purposes of this example, it isn’t necessary to change the description.

Select the number of bottles in your bottle kit by pressing either arrow key until the correct number blinks. Press ↵. For this example, select 24.

Type the volume for the bottles in your kit. For this example, 1000 is correct, so simply press ↵.

Type the length of the suction line, then press ↵.

If you change the length, the sampler will display a message,

“PLEASE WAIT!. . . GENERATING PUMP TABLES.”

Because this example requires samples every 15 minutes, select TIME PACED by pressing an arrow until the option TIME PACED blinks. Then, press ↵.

Type 0 for hours and press ↵. Type 15 for minutes and press ↵.

Tip: Move back and forth between hours and minutes by pressing an arrow key.

Because this program requires one sample in each bottle, select SEQUENTIAL by pressing an arrow until the option SEQUENTIAL blinks. Then, press ↵.

For this example, select NO by pressing an arrow until the option blinks. Then, press ↵. Selecting YES allows the program to run indefinitely by repeating the sample distribution. Continuous sampling assumes that filled bottles are replaced with empty bottles at regular service intervals.

4-2