Teledyne 6712FR manual 5 Programming Example With 750 Module Installed Continued, 4-32

6712FR Refrigerated Sampler

Section 4 Standard Programming

Table 4-5 Programming Example With 750 Module Installed (Continued)

8	PROGRAM MODULE?
	YES NO
	MODE OF OPERATION:
9	FLOWMETER
	LEVEL AND VELOCITY
	FLOW CALCULATION:
	AREA * VELOCITY

10LEVEL TO FLOW RATE

LEVEL TO AREA:

11CHANNEL SHAPE

DATA POINTS

ROUND PIPE

U-CHANNEL

12RECTANGULAR CHANNEL TRAPEZOIDAL CHANNEL

ROUND PIPE

13DIAMETER = 2.00 ft

CURRENT LEVEL IS

__.__ ft

14ADJUST LEVEL TO

__.__ ft

15	ZERO LEVEL OFFSET:
	_.___ ft

MAXIMUM DEPTH FOR

16VELOCITY MEASUREMENT

2” 3” 4”

17	NUMBER OF BOTTLES:
	1	2	4	8	12	24

Select YES to program the module.

The 750 can have two different modes of operation: Flowmeter or Level and Velocity.

For this example, choose Flowmeter. Press ↵.

When you select Flowmeter, you will have two options for performing the flow conversion: Area * Velocity or Level to Flow Rate.

For this example, choose Area * Velocity. Press ↵.

For this example, choose Channel Shape. Press ↵.

For the channel shape, select Round Pipe. Press ↵.

Enter the diameter of the round pipe. Press ↵.

The current level will be displayed. Enter an adjustment if needed. If the adjustment is different by more than 0.50 ft, you will be prompted “ARE YOU SURE? YES NO” Choose NO to re-enter; select YES if correct. Press ↵.

Enter the amount of zero level offset. Press ↵.

(This screen is applicable for standard-sized probes only.)

Select the maximum depth for the velocity measurement. Press ↵.

Select the number of bottles in your bottle kit by pressing either arrow key until the correct number blinks. Press ↵.

From this point forward, the screens will be the same as in Table 4-2.

4-32