Manuals / Teledyne / Kitchen Appliance / Refrigerator

Teledyne 6712FR manual Material Safety Data Sheet, Material Identification and Information

Models: 6712FR

1 244

Download 244 pages 57.15 Kb

Page 204

Material Safety Data Sheet

6712FR Refrigerated Sampler

Appendix B Material Safety Data Sheets

Material Safety Data Sheet

Indicating Silica Gel

Identity (Trade Name as Used on Label)

Manufacturer	MULTISORB TECHNOLOGIES, INC.		MSDS Number* :	M75
:	(formerly Multiform Desiccants, Inc.)
Address:	325 Harlem Road		CAS Number* :
	Buffalo, NY 14224
Phone Number (For Information): 716/824-8900			Date Prepared:	July 6, 2000
Emergency Phone		716/824-8900	Prepared By* :	G.E. McKedy
Number:

Section 1 - Material Identification and Information

Components - Chemical Name & Common Names	%*	OSHA	ACGIH	OTHER LIMITS
(Hazardous Components 1% or greater; Carcinogens 0.1% or		PEL	TLV	RECOMMENDE
greater)				D
Silica Gel SiO2	98.0	6mg/m3	10mg/m3
		(total dust)	(total dust)
Cobalt Chloride	>2.0	0.05mg/m3	.05mg/m3
		(TWA cobalt	(Cobalt, TWA)
		metal dust &
		fume)
Non-Hazardous Ingredients
TOTAL	100

Section 2 - Physical/Chemical Characteristics

Boiling		N/A	Specific Gravity		2.1
Point			(H20 = 1)
Vapor Pressure		N/A	Melting		N/A
(mm Hg and Temperature			Point
Vapor		N/A	Evaporation Rate		N/A
Density			(__________=1)
(Air =1)
Solubility	Insoluble, but will adsorb moisture.		Water	Not reactive, but will adsorb moisture.
in Water			Reactive
Appearance		Purple crystals, no odor.
and Odor

Section 3 - Fire and Explosion Hazard Data

Flash Point and		N/A	Auto-Ignition	N/A	Flammability Limits in	N/A	LEL	UEL
Methods Used			Temperature		Air % by Volume
Extinguisher	Dry chemical, carbon dioxide and foam can be used.
Media
Special Fire		Water will generate heat due to the silica gel which will adsorb water and liberate heat.
Fighting Procedures
Unusual Fire and		When exposed to water, the silica gel can get hot enough to reach the boiling point of water. Flooding with
Explosion Hazards		water will reduce the temperature to safe limits.

Section 4 - Reactivity Hazard Data

STABILITY

Stable

Unstable

Conditions Moisture and high humidity environments. To Avoid

Incompatibility	Water.
(Materials to Avoid)
Hazardous	Carbon dioxide, carbon monoxide, water
Decomposition
Products

HAZARDOUS POLYMERIZATION

May Occur

Conditions None. To Avoid

*Optional

Indicating Silica Gel

B-6

Image 204

Teledyne 6712FR Refrigerated Sampler Appendix B Material Safety Data Sheets, Physical/Chemical Characteristics

Contents

Installation and Operation Guide 6712FR Refrigerated SamplerPage Foreword Contact InformationPage 6712FR Refrigerated Sampler Safety Never operate the refrigerator in an explosive atmo- sphereAVERTISSEMENT DANGER - limited to the most extreme situationsto identify an imminent hazard, which if not avoided, will result in death or serious injuryHazard Symbols SafetyThe equipment and this manual use symbols used to warn of hazards. The symbols are explained below6712FR Refrigerated Sampler Safety Table of Contents Section 2 Installation/Preparation6712FR Refrigerated Sampler Section 1 IntroductionSection 4 Standard Programming Section 5 Extended Programming6712FR Refrigerated Sampler Table of Contents 6712FR Refrigerated Sampler Table of Contents 5.4 Programming for 700 Series Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 5.5 Programming SDI-12 Sondes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 5.6 Programming Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 5.6.1 Storm Water Runoff SamplingSection 8 Maintenance Appendix A Menu FlowchartsSection 6 SDI-12 Sondes Section 7 Remote OperationAppendix B Material Safety Data Sheets Appendix C General Safety ProceduresAppendix D Replacement Parts List Appendix E Accessories ListList of Tables 6712FR Refrigerated Sampler Table of Contents6712FR Refrigerated Sampler Table of Contents 5-3 Event Paced Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13 5-4 Sampler Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24 5-5 Serial Data Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-33 7-1 6712 Remote Menu Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 7-2 Serial Data Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 7-3 Remote Control of Sampler Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8 7-4 6712 Remote Phone Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9 8-1 Setting the Clock and Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 8-2 Resetting the Pump Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 8-3 Checking and Replacing the Internal Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 C-1 Hazardous Gases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-66712FR Refrigerated Sampler Table of Contents viiiSection 1 Introduction 1.1 About This Manual6712FR Refrigerated Sampler 1.2 About 700 Series Modules 1.3 SDI-12 Sondes 1.4 Memory to Store Monitoring DataAppendix A, Menu Flowcharts Appendix B, Material Safety Data Sheets Appendix C, General Safety Procedures Appendix D, Replacement PartsTable 1-1 6712FR Sampler Features General Features6712FR Refrigerated Sampler Section 1 Introduction Table 1-1 6712FR Sampler Features Continued 6712FR Refrigerated Sampler Section 1 IntroductionTable 1-1 6712FR Sampler Features Continued Sample Delivery System FeaturesStandard Programming Features 6712FR Refrigerated Sampler Section 1 IntroductionTable 1-1 6712FR Sampler Features Continued Extended Programming Features6712FR Refrigerated Sampler Section 1 Introduction Table 1-2 6712FR Sampler Construction Materials 6712 Controller, Pump, and Tubing Mechanical Specifications6712FR Refrigerated Sampler Section 1 Introduction Material6712 Controller Electrical Specifications 6712FR Refrigerated Sampler Section 1 IntroductionPower Consumption a Isco External Battery Capacity6712FR Refrigerated Sampler Section 1 Introduction Number of Complete Standard Sampling Routines6712 Controller Software Specifications Resolution6712FR Refrigerated Sampler Section 1 Introduction 1-106712FR Refrigerated Sampler Physical Specifications 6712FR Refrigerated Sampler Section 1 IntroductionHeight Top cover closed 49.25 in 125 cm Top cover open 59.25 in 150.5 cm145 lbs 66 kg Refrigerator only, no controller or bottle configuration 6712FR Refrigerated Sampler Section 1 IntroductionTemperature safety cutout that will disengage the compressor if the 6712FR Refrigerated Sampler Section 1 Introductioncompressor reaches 221F 105C 1-13Table 1-4 Connector Specifications Connector IconPOWER SOURCE 6712FR Refrigerated Sampler Section 1 IntroductionSection 2 Installation/Preparation 2.1.1 Installing theLOOSEN THE EXTENSION SLIGHTLY AND ADJUST ITS POSITION 6712FR Refrigerated Sampler6712FR Refrigerated Sampler Section 2 Installation/Preparation 2.1.3 Installing theFigure 2-1 Mounting the Controller Distributor Arm and6712FR Refrigerated Sampler Section 2 Installation/Preparation 24-Bottle Kits12-Bottle Kits 2-Bottle Kits6712FR Refrigerated Sampler Section 2 Installation/Preparation 2.2.1 Installing Racksnot rotate the distributor manually. Moving the arm man ually damages the distributor drive. If you see any mis6712FR Refrigerated Sampler Section 2 Installation/Preparation Figure 2-2 Installing the Bottle RacksFigure 2-3 Installing the 24-bottle, 12-bottle, and 8-bottle Kits 24-Bottle Kit2.3 Suction Line 6712FR Refrigerated Sampler Section 2 Installation/PreparationFigure 2-4 Installing the 2-bottle Kit 2.2.2 Removing Racks6712FR Refrigerated Sampler Section 2 Installation/Preparation 2.3.1 Guidelines for Measuring and Cutting the Suction Lineto Pump Tube Figure 2-5 Attaching the suction line to the pump tubing2.4 Strainers Table 2-2 Selecting the Right Strainer6712FR Refrigerated Sampler Section 2 Installation/Preparation Dimensions2.5 How Does the Sampler Work? e f g c b h a i j d6712FR Refrigerated Sampler Section 2 Installation/Preparation Figure 2-6 Identifying the Sampler Components6712FR Refrigerated Sampler Section 2 Installation/Preparation install the sampler, observe standard safety precautionsRefer to Appendix C for a discussion of safety If you must enter a manhole or other dangerous location to2.7 Connecting External Instruments 6712FR Refrigerated Sampler Section 2 Installation/Preparation2.6.2 Intake Placement 2.6.3 Positioning a Sampler 2.7.2 Rain Gauge Connector6712FR Refrigerated Sampler Section 2 Installation/Preparation 2-12Table 2-3 Connecting Isco Instruments to the Sampler Section 2 Installation/PreparationConnector Icon Power Source2.8 Locking the Sampler 6712FR Refrigerated Sampler Section 2 Installation/PreparationSection 3 Programming Introduction 3.1 Initial Operation6712FR Refrigerated Sampler Table 3-1 About the Keypad 6712FR Refrigerated Sampler Section 3 Programming IntroductionName Function3.2 Using Menus and Entering Numbers 6712FR Refrigerated Sampler Section 3 Programming IntroductionThe Main Menu 3.2.1 Selecting Menu Options 3.2.2 Entering Numbers3.3 Quick View Screens 6712FR Refrigerated Sampler Section 3 Programming IntroductionView Screens Quick View Screen3.4 Clock and Calendar 6712FR Refrigerated Sampler Section 3 Programming Introduction3.4.1 Setting the Clock and Calendar 6712FR Refrigerated Sampler Section 3 Programming IntroductionEntering Times and Dates Start Times3.5 Menu Screens Site Descriptions and Program Names Using the Clock Start Time Menu6712FR Refrigerated Sampler Section 3 Programming Introduction 3.6 Messages 6712FR Refrigerated Sampler Section 3 Programming IntroductionChanging the Site Name Using Help Notes 6712FR Refrigerated Sampler Section 3 Programming Introduction3.6.2 Help Notes To see a Help note3.7 Menu Trees BOTTLE VOLUME IS 3500 mlSTANDARD BOTTLE VOLUME EXCEEDED 6712FR Refrigerated Sampler Section 3 Programming IntroductionSee the screen charts in Appendix A See Reports on page 6712FR Refrigerated Sampler Section 3 Programming IntroductionFigure 3-1 Menu Tree for Standard Programming 3-116712FR Refrigerated Sampler Section 3 Programming Introduction 3-124.1 Switching Between Standard and Extended Modes Section 4 Standard Programming4.2 Language Selection, Units of Length 6712FR Refrigerated Sampler4.3 Programming Examples 6712FR Refrigerated Sampler Section 4 Standard ProgrammingDistribution 2 bottles per sample Sample Volume 250 milliliters Module No module installed6712FR Refrigerated Sampler Section 4 Standard Programming The following table is an example of flow-paced sampling6712FR Refrigerated Sampler Section 4 Standard Programming 4.4 Pacing 6712FR Refrigerated Sampler Section 4 Standard Programming4.4.1 Trigger Pacing 4.5 Distribution 6712FR Refrigerated Sampler Section 4 Standard Programming4.5.1 Sequential6712FR Refrigerated Sampler Section 4 Standard Programming Figure 4-1 Sample DistributionSequential Bottles-per-Sample4.6 Start Times 6712FR Refrigerated Sampler Section 4 Standard ProgrammingDelayed Start Screen Enable/Disable6712FR Refrigerated Sampler Section 4 Standard Programming Clock Start Time MenuFigure 4-2 Start Time Diagram Sampler enabled at start timeSampler disabled at start time by signal from pin F if the sampler is disabled. No samples are taken while disabledreadings pH and temperature for the pH module level, per flow volume readings for the flow modules level, velocity, flowrate, and positive flow volume readings for the area velocity 6712FR Refrigerated Sampler Section 4 Standard Programming4.8 Interrupting a Running Program 6712FR Refrigerated Sampler Section 4 Standard Programming4.8.1 Stop Program 4.8.2 Resume Program When selected, you will be asked to enter the volume to be Pump Tube Alarmreset the pump counts on the counter. This will remove the Maintenance4.9 Other Functions 4.10 Manual Functions 4.11 Grab SamplesAdjust Volume Select this option to change the sample volume within the limits4.12 Calibrate Volume 6712FR Refrigerated Sampler Section 4 Standard ProgrammingTaking a Grab Sample Figure 4-4 Taking a Grab SampleCalibrating Sample Volumes 6712FR Refrigerated SamplerSection Standard Programming4.13 Operating the Pump 4.14 Moving the Distributor Arm6712FR Refrigerated Sampler Section 4 Standard Programming Operating the Pump4.15 Reports 6712FR Refrigerated Sampler Section 4 Standard Programming4.15.1 Collecting Reports 4.15.2 Viewing the Data4.15.3 Configuring Reports 6712FR Refrigerated Sampler Section 4 Standard ProgrammingViewing Data enables and disables, power losses, and so on. Table 4-3 lists each event. The letters in the Error column are codes for the causes ofmissed samples. The source and error codes appear with expla pH module, the readings are temperature and pH. For the rainTable 4-3 Reports Program Events, Source Codes, and Error Codes 6712FR Refrigerated Sampler Section 4 Standard Programming4-21 Error Codes figured to show program settings, sampling results, combined6712FR Refrigerated Sampler Section 4 Standard Programming Source CodesSAMPLER ID# 3687447734 0632 19-DEC-02 SOURCE ERROR LIQUID 6712FR Refrigerated Sampler Section 4 Standard ProgrammingFigure 4-6 Report Sampling Results == TIMESAMPLER ID# SAMPLER 6712FR Refrigerated Sampler Section 4 Standard Programming Figure 4-9 Report Summary4-27 4.16 System IDs 4.17 Programming for 700 Series Modules6712FR Refrigerated Sampler Section 4 Standard Programming System IDsTable 4-4 Programming Example With 730 Module Installed 6712FR Refrigerated Sampler Section 4 Standard Programming4-29 Table 4-4 Programming Example With 730 Module Installed Continued 6712FR Refrigerated Sampler Section 4 Standard Programming4-30 17a 17bTable 4-5 Programming Example With 750 Module Installed Table 4-4 Programming Example With 730 Module Installed Continued6712FR Refrigerated Sampler Section 4 Standard Programming 4-31Table 4-5 Programming Example With 750 Module Installed Continued 6712FR Refrigerated Sampler Section 4 Standard Programming4-32 Section 5 Extended Programming 5.1 Extended and Standard Mode 5.2 One-Part and Two-Part Programs6712FR Refrigerated Sampler Programs 6712FR Refrigerated Sampler Section 5 Extended Programming5.3.1 Selecting a Stored ProgramTable 5-1 Selecting a Stored Extended Program 6712FR Refrigerated Sampler Section 5 Extended Programming5.4 Programming for 700 Series Modules 5.5 Programming SDI-12 Sondes 5.6 Programming Examples6712FR Refrigerated Sampler Section 5 Extended Programming 6712FR Refrigerated Sampler Section 5 Extended Programming SamplingTable 5-2 Storm Water Runoff Sampling Part ‘B’ pause and resumes None Start time Delayed start of 1 minute730 Bubbler Module Installed 6712FR Refrigerated Sampler Section 5 Extended ProgrammingTable 5-2 Storm Water Runoff Sampling Continued 6712FR Refrigerated Sampler Section 5 Extended ProgrammingTable 5-2 Storm Water Runoff Sampling Continued 6712FR Refrigerated Sampler Section 5 Extended ProgrammingTWO-PART PROGRAM UNIFORM TIME PACEDTable 5-2 Storm Water Runoff Sampling Continued 6712FR Refrigerated Sampler Section 5 Extended ProgrammingSelect RAIN Table 5-2 Storm Water Runoff Sampling Continued 6712FR Refrigerated Sampler Section 5 Extended Programming5-10 PACED BY FLOW PULSESDELAYED START Table 5-2 Storm Water Runoff Sampling Continued6712FR Refrigerated Sampler Section 5 Extended Programming 5-115.7 Suction Head 5.8 Rinses and Retries5.9 Pacing Extended Screen for Suction Head SettingsTable 5-3 Event Paced Sampling 6712FR Refrigerated Sampler Section 5 Extended ProgrammingEnter a set point of 1 foot Table 5-3 Event Paced Sampling Continued 6712FR Refrigerated Sampler Section 5 Extended Programming5-14 6712FR Refrigerated Sampler Section 5 Extended Programming 5.9.3 Nonuniform Time Pacing 5.9.4 Nonuniform Clock Time Pacing5.9.5 Nonuniform Interval Pacing 5.9.6 Random Interval Pacing CLOCK TIMES5.10 Distribution Time Switching6712FR Refrigerated Sampler Section 5 Extended Programming 5.10.1Time Switched Enter the time between bottle switchesEnter the first bottle switch time 6712FR Refrigerated Sampler Section 5 Extended ProgrammingTime Switched Flow-paced, No sample at start 6712FR Refrigerated Sampler Section 5 Extended ProgrammingFigure 5-1 Sample Distribution 5-185.11 Flow Proportional Sample Volumes 6712FR Refrigerated Sampler Section 5 Extended Programming5.11.1 Calculating Variable Sample Volume Settings Figure 5-2 Factors Affecting Flow-Weighted Variable-Volume SamplesTotal Bottle Capacity Minimum Required Sample Volume 6712FR Refrigerated Sampler Section 5 Extended ProgrammingFigure 5-3 Variable-Volume Scenario 5.11.2 Calculations when Using an External Flow Meter6712FR Refrigerated Sampler Section 5 Extended Programming 5.12 Sampler Enable 5.11.3 Calculations when Using a 700 Series Flow Module6712FR Refrigerated Sampler Section 5 Extended Programming When the sampler detects that it is disabled at start time, it sus- pends the program until it is enabled. Once enabled, the sampler collects a sample only when programmed to take a sample at the enable time. The diagram in Figure 5-4 shows the sampler’s response when enabled or disabled at the start time Figure 5-4 Start Time Diagram for Sampler Enable Settings6712FR Refrigerated Sampler Section 5 Extended Programming Table 5-4 Sampler Enable Sampler Enable6712FR Refrigerated Sampler Section5.13 Sampler Enable In addition to programming enable conditions, extended programming lets you control the sampler’s response to its enable 5.13.1 Once Enabled Stay5.13.4 Delay To Start Of 5.13.6 Resetting the Sample Interval at Enable6712FR Refrigerated Sampler Section 5 Extended Programming Sampling5.14 Pauses/Resumes 5.15 Running Programs6712FR Refrigerated Sampler Section 5 Extended Programming Pause and Resume Screens5.16 Sampling Reports 5.17 Other Functions 5.18 Software Options5.18.1 Liquid Detector Enable/Disable 6712FR Refrigerated Sampler Section 5 Extended ProgrammingSetting Up Dual Samplers 6712FR Refrigerated Sampler Section 5 Extended Programming5.18.2 Programming Style 5.18.3 Measurement Interval 5.18.4 Dual Sampler Mode Dual Sampler ModeAdjusting the Display Backlighting 6712FR Refrigerated Sampler Section 5 Extended ProgrammingBottle Full Detect Event MarksFigure 5-5 Event Mark Timing Diagram 6712FR Refrigerated Sampler Section 5 Extended Programming5.18.5 Pre-sample and Post-sample Purge Counts 6712FR Refrigerated Sampler Section 5 Extended Programming 5.18.6 Serial Output Programming the serial outputTable 5-5 Serial Data Codes 6712FR Refrigerated SamplerSection Extended ProgrammingTable 5-5 Serial Data Codes Continued 6712FR Refrigerated Sampler Section 5 Extended Programming5.18.7 Program Lock IdentifierFigure 5-6 Password Protected Functions 6712FR Refrigerated Sampler Section 5 Extended Programming5-35 From Standby5.19 Hardware Setup 5.19.1 SDI-12 Sonde Setup 5.19.2 Rain Gauge Setup6712FR Refrigerated Sampler Section 5 Extended Programming The state of the I/O lines is not defined when the sampler is OFF 6712FR Refrigerated Sampler Section 5 Extended Programming5-37 Example I/O Pin Programming 6712FR Refrigerated Sampler Section 5 Extended Programming5-38 Example Dialout Alarms 5.19.4 Dialout AlarmsDialout alarms require the sampler to be equipped with the factory-installed 2400 baud talking modem, or the externalWhen the call is answered, the sampler’s modem announces the alarm condition analog talking modem or sends a digital textwith an acknowledgment when the keyed entry is correct A record of alarms and acknowledgements is available in theTemperature 6712FR Refrigerated Sampler Section 5 Extended Programming5.19.7 Refrigerator 5.19.8 Analog Output5.20 Memory 6712FR Refrigerated Sampler Section 5 Extended ProgrammingAdd or remove a refrigerator temperature sensor as I/O3 6712FR Refrigerated Sampler Section 5 Extended Programming5.21 Pressurized Lines 5.22 Command Driven Operation 6712FR Refrigerated Sampler Section 5 Extended Programming5.23 Command Driven Sampler Responses 6712FR Refrigerated Sampler Section 5 Extended Programming6712FR Refrigerated Sampler Section 5 Extended Programming 2 = LIQUID LOST not enough liquid to satisfy requirementsSection 6 SDI-12 Sondes 6.1 SDI-12 Data Parameters6712FR Refrigerated Sampler 6712FR Refrigerated Sampler Section 6 SDI-12 Sondes Figure 6-1 SDI-12 Sonde Parameters6.3 Isco Ready Sondes Connecting an Isco Ready Sonde6712FR Refrigerated Sampler Section 6 SDI-12 Sondes 6.5 Sonde Setup - Storing Parameter Data Connecting Other SDI-12 Sondes6712FR Refrigerated Sampler Section 6 SDI-12 Sondes 6.6 Sonde Calibration and Validation 6712FR Refrigerated Sampler Section 6 SDI-12 Sondes6712FR Refrigerated Sampler Section 6 SDI-12 Sondes 6.6.1 The CalibrationScreens When you are done validating, select “DONE” to return to the 6712FR Refrigerated Sampler Section 6 SDI-12 Sondes6712FR Refrigerated Sampler Section 6 SDI-12 Sondes Section 7 Remote Operation 6712FR Refrigerated SamplerFigure 7-2 Example list of remote menu commands 6712FR Refrigerated Sampler Section 7 Remote OperationFigure 7-1 Press and hold ?? to connect to the sampler 7.1.1 Menu ControlTable 7-1 6712 Remote Menu Commands Menu Command6712FR Refrigerated Sampler Section 7 Remote Operationto received commands. An external program can be as simple as manually entered commands to collect a sample when needed, orThe 6712 controller will respond to four commands 6712FR Refrigerated SamplerThe command to send current status is STS,1CR 6712FR Refrigerated Sampler Section 7 Remote OperationTable 7-2 Serial Data Codes 6712FR Refrigerated Sampler Section 7 Remote OperationIdentifier ParameterTable 7-2 Serial Data Codes Continued 6712FR Refrigerated Sampler Section 7 Remote OperationIdentifier ParameterTable 7-3 Remote Control of Sampler Keypad Optionally, commands to the sampler can be validated using achecksum. Checksum validation can avoid problems caused by faulty program control or communication lines. When using theTable 7-4 6712 Remote Phone Commands Command6712FR Refrigerated Sampler Section 7 Remote Operation PhoneTable 7-4 6712 Remote Phone Commands Continued Command6712FR Refrigerated Sampler Section 7 Remote Operation PhoneSection 8 Maintenance 8.1 Maintenance Checklist8.2 Cleaning Guidelines 6712FR Refrigerated SamplerMaintenance When necessary, clean the controller with warm soapy water. Toprevent moisture damage, always cap the connectors at the back of the controller tightly. Keep the controller power cable con8.3 Cleaning Protocols for Priority Pollutants 6712FR Refrigerated Sampler Section 8 Maintenance8.3.1 Isco Glass Sample8.4 Maintenance Screens 6712FR Refrigerated Sampler Section 8 Maintenance8.4.1 Set Clock Entering Times and Dates Table 8-1 Setting the Clock and Calendar 6712FR Refrigerated Sampler Section 8 MaintenanceTable 8-2 Resetting the Pump Counter Table 8-3 Checking and Replacing the Internal Battery6712FR Refrigerated Sampler Section 8 Maintenance 8.4.3 Internal BatteryTable 8-3 Checking and Replacing the Internal Battery Continued 6712FR Refrigerated Sampler Section 8 Maintenance8.4.4 Diagnostics 6712FR Refrigerated Sampler Section 8 Maintenance PLEASE WAIT ‘RAM’ PASSED TEST PLEASE WAIT ‘ROM’ PASSED TESTTEST PUMP? YES NO PUMPING PUMPING ON/OFF RATIO = PURGING PURGING ON/OFF RATIO = TEST DISTRIBUTOR YES NO8.5 Replacing the Pump Tube 6712FR Refrigerated Sampler Section 8 Maintenance6712FR Refrigerated Sampler Section 8 Maintenance 8.5.1 Checklist For Replacing Pump TubeTo extend the pump tube life Conditions that shorten tube life6712FR Refrigerated Sampler Section 8 Maintenance Figure 8-1 Removing and Replacing the Pump TubeFigure 8-2 Placing the Pump Tube in the Liquid Detector 8-118.6 Opening the Controller Case 8.7 Replacing the Desiccant6712FR Refrigerated Sampler Section 8 Maintenance To open the case6712FR Refrigerated Sampler Section 8 Maintenance Follow the instructions in Opening the Controller Case in SectionFigure 8-3 Opening the Controller 8.8 Replacing the Internal Battery 6712FR Refrigerated Sampler Section 8 MaintenanceBattery Status Display Figure 8-4 Main Circuit Board Connections6712FR Refrigerated Sampler Section 8 Maintenance To replace the internal battery8.9 Error Messages 8.10 Pump Tube Warning6712FR Refrigerated Sampler Section 8 Maintenance Error Messages8.11 Servicing the Refrigerator 6712FR Refrigerated Sampler Section 8 MaintenanceTemperature Control Box Assembly 8.11.1 Electrical System6712FR Refrigerated Sampler Section 8 Maintenance Figure 8-7 Control Box Wiring Figure 8-8 Control Box ConnectionsLEDs Figure 8-6 Thermostat Logic Circuit Board6712FR Refrigerated Sampler Section 8 Maintenance 6712FR Refrigerated Sampler Section 8 Maintenance Always recover the refrigerant6712FR Refrigerated Sampler Section 8 Maintenance Figure 8-9 Refrigeration System SchematicCapillary Tube Condenser Coil6712FR Refrigerated Sampler Section 8 Maintenance 8-22Appendix A Menu Flowcharts See Maintenance Screens on page A-7 See Manual Functions Screens onSee the charts on pages A-2 through A-19 6712FR Refrigerated Sampler6712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-2 Standard Programming Programming ScreensProgramming screens shown are for a 730 Bubbler Flow Module. Screens for other modules may vary6712FR Refrigerated Sampler Appendix A Menu Flowcharts N o t e sFigure A-3 Standard and Extended Programming Start Times Continued from Figure A-26712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-4 Standard Programming Quick View Programming ScreensRefer to Module’s manual Continued in Figure A-56712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-5 Standard Programming Quick View Start TimesContinued from Figure A-4 See Run Time Screens on page6712FR Refrigerated Sampler Appendix A Menu Flowcharts Note A Menu access can be controlled with the optionalFigure A-6 View Report Program Lock. See Note Note B 1108 - Program LockN o t e 6712FR Refrigerated Sampler Appendix A Menu FlowchartsFigure A-7 Maintenance Screens See Note A6712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-8 Manual Functions ScreensO T H E R F U N C T I O N S if not known6712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-9 Extended Programming Programming Screens6712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-10 Extended Programming Equipment SetupA-10 Continued from Figure A-96712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-11 Extended Programming Pacing and DistributionA-11 See Figure A-126712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-12 Extended Programming Event ConditionsA-12 All valid event options will be shown6712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-13 Extended Programming Programmed Sampler EnableA. All valid enable options will be shown. Enable options may include N o t e s6712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-14 Extended Programming Quick View Programming ScreensA-14 Programming screens for a 700 Series6712FR Refrigerated Sampler Appendix A Menu Flowcharts When Liquid Detector is onFigure A-15 Extended Programming Quick View Equipment Set-Up A-156712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-16 Extended Programming Quick View Pacing and DistributionA-16 Continued from Figure A-156712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-17 Extended Programming Quick View Programmed Sampler EnableA. All valid enable options will be shown. Enable options may include N o t e s6712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-18 Extended Programming Normal View Software OptionsA-18 O T H E R F U N C T I O N S6712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-19 Extended Programming Quick View Software OptionsA-19 O T H E R F U N C T I O N SN o t e s 6712FR Refrigerated Sampler Appendix A Menu FlowchartsA. - denotes input signal. - denotes output signal Figure A-20 Extended Programming Normal View Hardware6712FR Refrigerated Sampler Appendix A Menu Flowcharts A. - denotes input signalN o t e s Figure A-21 Extended Programming Quick View Hardware6712FR Refrigerated Sampler Appendix A Menu Flowcharts A. Factory installed option. Requires B1 hardware or newerA. Factory installed option. Requires B1 hardware or newer B. Requires factory-installed Dialout Modem and B2 hardware or newer6712FR Refrigerated Sampler Appendix A Menu Flowcharts Figure A-24 SDI-12 Sonde ScreensA-23 Proceed to calibration/validation6712FR Refrigerated Sampler Appendix A Menu Flowcharts A-24Appendix B Material Safety Data Sheets 6712FR Refrigerated SamplerSECTION I -- PRODUCT IDENTIFICATION SECTION IV -- FIRE EXPLOSION DATA SECTION V -- HEALTH HAZARD DATAPage Page Material Safety Data Sheet 6712FR Refrigerated Sampler Appendix B Material Safety Data SheetsSection 2 - Physical/Chemical Characteristics Section 1 - Material Identification and Information6712FR Refrigerated Sampler Appendix B Material Safety Data Sheets Section 7 - Precautions for Safe Handling and Use/Leak ProceduresSection 5 - Health Hazard Data Section 6 - Control and Protective Measures6712FR Refrigerated Sampler Appendix B Material Safety Data Sheets Appendix C General Safety Procedures C.1 Practical Safety Precautions6712FR Refrigerated Sampler C.1.1 Hazards6712FR Refrigerated Sampler Appendix C General Safety Procedures C.1.2Planning C.1.36712FR Refrigerated Sampler Appendix C General Safety Procedures C.1.5Traffic Protection C.1.6C.2 Lethal Atmospheres in Sewers 6712FR Refrigerated Sampler Appendix C General Safety ProceduresC.1.9 Emergencies6712FR Refrigerated Sampler Appendix C General Safety Procedures The presence of H2S in a sewer atmosphere is easily determinedC.3 Hazardous Gases Table C-1 Hazardous Gases6712FR Refrigerated Sampler Appendix C General Safety Procedures Table C-1 Hazardous Gases Continued 6712FR Refrigerated Sampler Appendix C General Safety Procedures6712FR Refrigerated Sampler Appendix C General Safety Procedures Table C-1 Hazardous Gases Continued6712FR Refrigerated Sampler Appendix C General Safety Procedures Table C-1 Hazardous Gases Continued6712FR Refrigerated Sampler Appendix C General Safety Procedures C-10Appendix D Replacement Parts List D.1 Replacement Parts Diagrams and Listings6712FR Refrigerated Sampler Teledyne Isco, Inc6712FR Refrigerated Sampler Appendix D Replacement Parts List 6712FR Refrigerated Sampler Appendix D Replacement Parts List 6712FR Refrigerated Sampler Appendix D Replacement Parts List 6712FR Refrigerated Sampler Appendix D Replacement Parts List 6712FR Refrigerated Sampler Appendix D Replacement Parts List LocknutScrew, 10-32 x 3/4 6712FR Refrigerated Sampler Appendix D Replacement Parts List 6712FR Refrigerated Sampler Appendix D Replacement Parts List 6712FR Refrigerated Sampler Appendix D Replacement Parts List 6712FR Refrigerated Sampler Appendix D Replacement Parts List D-10Appendix E Accessories List E.1 Order Information E.2 SamplersE.3 Bottle Kits 6712FR Refrigerated SamplerE.4 Bottle Racks Retaining Rings Discharge Tubes Distributor Arm E.5 Bulk Sets of Bottles with Lids6712FR Refrigerated Sampler Appendix E Accessories List E.6 Pump Tubes, Suction Line, Strainers E.7 Data Collection Devices and Cables6712FR Refrigerated Sampler Appendix E Accessories List E.8 12-Volt Power Sources E.9 Modules, Rain Gauges Interfacing InstrumentsE.10 SDI-12 Data Acquisition Connect Cables 6712FR Refrigerated Sampler Appendix E Accessories List6712FR Refrigerated Sampler Appendix E Accessories List 6712FR Refrigerated Sampler Appendix E Accessories List Index 6712FR Refrigerated SamplerIndex-1 6712FR Refrigerated Sampler Index Index-26712FR Refrigerated Sampler Index Index-36712FR Refrigerated Sampler Index Index-4Page Page DECLARATION OF CONFORMITY ratioStandard DescriptionPage rmity DECLARATION OF CONFORMITYStandard DescriptionPage Teledyne Isco One Year Limited Factory Service Warranty Return AuthorizationMailing address Phone