Teledyne manual Sonde Setup - Storing Parameter Data, 6712FR Refrigerated Sampler SDI-12 Sondes

6712FR Refrigerated Sampler Section 6 SDI-12 Sondes

Connecting Other SDI-12

Sondes

SELECT ADDRESS OF

SONDE TO SETUP:

3__ __ DONE

•Select the address of the sonde you want to set up.

Company Model

Optional Information

4SONDE AT ADDRESS __ HAS __ DATA VALUES

•You can wait a few seconds, or press ↵ to advance to the next screen:

	DATA FROM SONDE __
5	1 = OTHER
	2 = OTHER
	3 = OTHER	--->

•Press an arrow key until the cursor is on the data you want to identify. Then, press ↵. A scrolling screen listing possible parameters will appear.

SONDE ___ , DATA 1: <-- pH

6TEMPERATURE (oC) TEMPERATURE (oF) --->

•Make your selection and press ↵.

		DATA FROM SONDE __
3	<--	1 = TEMPERATURE(oC)
		2 = OTHER
		3 = OTHER	--->

•Repeat the process until you have defined all the data. Press “DONE” when finished.

DATA FROM SONDE __ <--- 4 = pH

45 = LEVEL

DONE

•You will then be asked if you want to store the parameter data. Refer to “SONDE SETUP

-STORING PARAMETER DATA”

in the following paragraphs.

6.5Sonde Setup - Storing Parameter Data

Whether you are using an Isco Ready sonde or other SDI-12 com- patible sonde, you will need to tell the 6712 if you want to store all of the parameter data or data from selected parameters.

Data is stored in memory partitions. A fixed amount of memory is available to store data. If you are using some parameters to simply trigger an event or enable condition, it is not necessary to store the data.

If all of the parameters’ data will fit in memory, you will be asked if you want to store all of the parameter data. Answering “NO” will still allow you to selectively store parameter data; otherwise, all data will be stored.

You will be asked to store parameter data during the setup process. You can also manually change the setup using options in the Hardware menu.

To access the setup option in the Hardware menu, select Other Function from the main menu, then choose Hardware. Advance through the screens until you see one that displays SDI-12 DATA.

6-4