6712FR Refrigerated Sampler, Section, Standard Programming

6712FR Refrigerated Sampler
Section 4	Standard Programming

4.15.4	Sampling Results	As the sampler runs a program, it records the program’s events.
	Report	Program events include such items as sample events, program
		enables and disables, power losses, and so on. Table 4-3lists each
		event with a short description. You can view the report by fol-
		lowing the steps in Viewing the Data on page 4-18or print the log
		as the Sampling Results report.
		In the text file version of the report, sample-event entries include
		the time of the event as well as the sample and bottle numbers.
		The sample column contains the sample number deposited into
		the bottle. This information reflects the distribution selected for
		the program.
		The letters in the Source columns are codes for the cause of the
		event. The letters in the Error column are codes for the causes of
		missed samples. The source and error codes appear with expla-
		nations at the end of the report. A list of codes appears in Table
		4-3.
		The last column in the Sampling Results report records the
		pump counts for the sample event. Large variations in pump
		counts from event to event indicate fluctuating heads, a relocated
		suction line, or a temporarily clogged strainer.
4.15.5	Combined Results	At the time of each sample event, the sampler records the
	Report	readings from each connected module, rain gauge, or SDI-12
		sonde. The Combined Results Report presents the event time,
		sample and bottle number, and the respective readings from the
		device.
		For flow modules, the readings are level and flow rate. For the
		pH module, the readings are temperature and pH. For the rain
		gauge and SDI-12 Sonde, the readings vary according to the
		selections enabled during the hardware setup in extended pro-
		gramming. When recording four or more sonde parameters, the
		Combined Results report will exceed the standard 40 character
		width. To read the additional columns, the data must be collected
		with Flowlink 4 for Windows software.
4.15.6	Summary Report	This report summarizes the rain gauge or module data. The
		types of readings are the same as those available to the Com-
		bined reports. The sampler compiles the data to present a daily
		total, the day’s average, maximum, and minimum reading, and a
		listing of hourly averages. The sampler then graphs the day’s
		readings.

4-20

4.15.4

Sampling Results

As the sampler runs a program, it records the program’s events.

Report

Program events include such items as sample events, program

enables and disables, power losses, and so on. Table 4-3lists each

event with a short description. You can view the report by fol-

lowing the steps in Viewing the Data on page 4-18or print the log

as the Sampling Results report.

In the text file version of the report, sample-event entries include

the time of the event as well as the sample and bottle numbers.

The sample column contains the sample number deposited into

the bottle. This information reflects the distribution selected for

the program.

The letters in the Source columns are codes for the cause of the

event. The letters in the Error column are codes for the causes of

missed samples. The source and error codes appear with expla-

nations at the end of the report. A list of codes appears in Table

The last column in the Sampling Results report records the

pump counts for the sample event. Large variations in pump

counts from event to event indicate fluctuating heads, a relocated

suction line, or a temporarily clogged strainer.

4.15.5

Combined Results

At the time of each sample event, the sampler records the

readings from each connected module, rain gauge, or SDI-12

sonde. The Combined Results Report presents the event time,

sample and bottle number, and the respective readings from the

device.

For flow modules, the readings are level and flow rate. For the

pH module, the readings are temperature and pH. For the rain

gauge and SDI-12 Sonde, the readings vary according to the

selections enabled during the hardware setup in extended pro-

gramming. When recording four or more sonde parameters, the

Combined Results report will exceed the standard 40 character

width. To read the additional columns, the data must be collected

with Flowlink 4 for Windows software.

4.15.6

Summary Report

This report summarizes the rain gauge or module data. The

types of readings are the same as those available to the Com-

bined reports. The sampler compiles the data to present a daily

total, the day’s average, maximum, and minimum reading, and a

listing of hourly averages. The sampler then graphs the day’s

readings.