Teledyne 6712FR manual Start Time Diagram

6712FR Refrigerated Sampler Section 4 Standard Programming

Sampler enabled at start time

Sampler disabled at start time by signal from pin F

A sample event at the start time occurs for time-paced programs.

A sample is not taken at start time

if the sampler is disabled. No samples are taken while disabled.

Figure 4-2 Start Time Diagram

4.7Running Programs To run a program, select RUN from the main menu. You may also select YES at the RUN THIS PROGRAM NOW? screen at the end of the programming screens.

4.7.1 Run Time Screens While running a sampling program the sampler displays a variety of messages that report the program’s status. For example, if the sampler has not yet reached the programmed start time, it displays the scheduled start time as well as the current time.

Once the program reaches the start time, you can determine the time of the next sample, the next bottle to receive a sample, sample distribution, and other information. Other messages appear while the sampler runs through a sampling cycle and takes a sample. When the sampler needs to report multiple mes- sages, it alternates them, displaying each for one to three seconds.

4-10