Teledyne 6712FR manual Selecting a Stored Extended Program

6712FR Refrigerated Sampler

Section 5 Extended Programming

The current program is the program you see when you select PROGRAM from the main menu and page through the pro- gramming screens. It is the program the sampler uses when you select RUN from the main menu.

You cannot delete programs, but you can modify them as often as necessary. To run a program with different settings without losing the settings in your current program, select a stored program and modify its settings.

For example, assume you have been running the current program, named “EXTENDED 1,” at site A for several weeks. This program contains all the settings you need for site A, and you don’t want to lose those settings.

Nevertheless, you need another program because you want to move the sampler to site B, so you select “EXTENDED 2” and modify it for site B. The settings in “EXTENDED 1” are pre- served automatically. When you return the sampler to site A, you won’t need to reprogram the sampler. Merely select “EXTENDED 1” again, double-check the program settings, and run the program. To select an extended program, follow the steps in Table 5-1.

Table 5-1 Selecting a Stored Extended Program

1

2

3

4

5

6

7

6712 SAMPLER,

EXTENDED PROGRAMMING

For HELP at any

screen, press ? key.

RUN “EXTENDED 1”

PROGRAM

VIEW REPORT

OTHER FUNCTIONS

PROGRAM NAME:

"EXTENDED 1"

SITE DESCRIPTION:

"______"

SELECT NEW PROGRAM

CHANGE PROGRAM NAME

“EXTENDED 1”

“EXTENDED 2”

“EXTENDED 3” “EXTENDED 4”

PROGRAMMING COMPLETE

RUN THIS PROGRAM

NOW?

YES NO

RUN “EXTENDED 2”

PROGRAM

VIEW REPORT

OTHER FUNCTIONS

Press the On/Off key to turn the sampler on. Press ↵ to clear the start-up message.

If the words “STANDARD PROGRAMMING” appear on the second line of the start-up message, the sampler is using the standard programming screens. To see the extended screens, type 6712.2 at the main menu shown in step 2.

Select PROGRAM from the main menu.

Select PROGRAM NAME: "EXTENDED 1" from the quick view menu.

Select SELECT NEW PROGRAM to change the program.

You can go through QUICK VIEW screens quickly by pressing ↵ at each screen. You can also change settings in quick view screens; see Changing Settings in a Quick View Screen on page 3-4.

Select the name of the extended program you want to use.

Each program’s name appears on the same line. If you inadvertently give two programs identical names, you can still identify them by their location on the screen.

To run the program immediately, select YES. To run the program later, select NO.

5-3