Philips 30 manual Specifications, Maintenance

Specifications

AMPLIFIER
Output power	2 x 10 W RMS
Signal-to-noise ratio	≥ 65 dBA (IEC)
Frequency response	40 – 20000 Hz, ± 3 dB
Input sensitivity AUX	0.5 V (max. 2 V)
Impedance loudspeakers	......................................... 8	Ω
Impedance headphones	32 Ω -1000	Ω

TAPE DECK
Frequency response
Normal tape (type I)	80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I)	50 dBA
Wow and flutter	≤ 0.4% DIN
SPEAKERS

E n g l i s h

CD PLAYER
Frequency range	20 – 20000 Hz
Signal-to-noise ratio		75 dBA
TUNER
FM wave range	87.5 – 108 MHz
AM wave range	530 – 1700 kHz
Sensitivity at 75 Ω
– mono, 26 dB signal-to-noise ratio		............ 2.8 µV
– stereo, 46 dB signal-to-noise ratio		........ 61.4 µV
Selectivity		≥ 28 dB
Total harmonic distortion		≤ 5%

Frequency response	63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio	≥ 50 dBA

Bass reflex system

Dimensions (w x h x d) . 155 x 224 x 250 (mm)

..................................................	6.10 x 8.82 x 9.84 (inch)
GENERAL INFORMATION
AC Power	120 V / 60 Hz

Dimensions (w x h x d) .. 140 x 228 x 262 (mm)

................................................ 5.51 x 8.98 x 10.31 (inch)

Weight (with/without speakers) ..................................

............................................................... approx. 8.4 / 3.3 kg

............................................. approx. 18.48 / 7.26 pound

Standby power consumption	< 3 W
Subject to modification

Maintenance

Cleaning the Cabinet

¶Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Cleaning Discs

¶When a disc becomes dirty,

clean it with a cleaning cloth. Wipe the disc from the center out.

¶ Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.

Cleaning the disc lens

¶After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.

Cleaning the Heads and the Tape Paths

¶To ensure good recording and playback quality, clean the heads A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation.

¶Use a cotton swab slightly moistened with cleaning fluid or alcohol.

¶You can also clean the heads by playing a cleaning tape once.

A A B C

Demagnetizing the heads

¶Use a demagnetizing tape available at your dealer.

19

pg 001-021/MC30/37-Eng 19 12/8/00, 9:09 AM 3140 115 2xxx1