Philips 30 manual Activating and deactivating, Setting Timer

Clock/Timer
En							3	Press TIMER ON•OFF to confirm your
								desired mode.
gli	STANDBY-ON							➜ The selected source	,	or RECORD is
sh								shown.
								Display sequence scrolls SET ON TIME and
	iR							flashes. The clock digits for the hours flash.
				M C - 3 0 M I C R O S Y S T E M			4	Turn VOLUME to set the hours: clockwise for
		SHUFFLE	FWD á/ë					hours up; counter-clockwise for hours down.
	CLOCK	SIDE A/B		SOURCE	STOP	PLAY•PAUSE	5	Press TIMER ON•OFF again.
			TUNING					➜ The clock digits for the minutes flash.
				REPEAT	PRESET
	TIMER ON•OFF	PROGRAM REW à /í REV MODE/ BAND RECORD				VOLUME	6	Turn VOLUME to set the minutes: clockwise for
								minutes up; counter-clockwise for minutes down.
	Setting the clock						7	Press TIMER ON•OFF to confirm the time.
1	In standby, press CLOCK.							➜ The timer is now set and activated.

➜The clock digits for the hours flash.

2	Turn VOLUME to set the hours: clockwise for	Activating and deactivating
		TIMER
	hours up; counter-clockwise for hours down.
3	Press CLOCK again.	¶ In standby or during playback, press TIMER
	➜ The clock digits for the minutes flash.	ON•OFF on the system once (TIMER on the
4	Turn VOLUME to set the minutes: clockwise for	remote control).
		➜ Display shows	if activated, and
	minutes up; counter-clockwise for minutes down.
		disappears if deactivated.

5Press CLOCK to confirm the time.

	Activating and deactivating
Setting TIMER
	SLEEP

¶The system can be used as an alarm clock, whereby the CD,TUNER or TAPE is switched on at a set time.The clock time needs to be set first before the timer can be used.

¶You can also use it to record a favorite tuner program at a set period (REC TUN, see TAPE RECORDER)

¶During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.

1In any mode, press TIMER ON•OFF for more than 2 seconds.

2Turn VOLUME clockwise to select sound source.

➜ Display sequence shows CD, TUNER, TAPE or REC TUNER.

The sleep timer enables the system to switch off by itself after a set period of time.The clock time needs to be set first before the sleep timer can be used.

¶ Press SLEEP on the remote	APE	TUNER
control once or more.	UX	SLEEP

➜Display shows SLEEP and

one of the sleep time options SC INC. SURR in sequence: 60, 45, 30,15, SLEEP OFF, 60... if you have selected a time. Once SLEEP is activated, SLEEP ON scrolls across the display at repeated intervals.

¶To deactivate, press SLEEP on the remote control once or more until SLEEP OFF is shown, or press STANDBY-ONon the system or remote control.

18

pg 001-021/MC30/37-Eng 18 12/8/00, 9:09 AM 3140 115 2xxx1