15
English
3140 115 2xxx1
Tuner
TUNING
CLOCK SIDE A/B
VOLUME
SHUFFLE
SOURCE
TIMER ON•OFF PROGRAM
REPEAT
REV MODE/ BAND
STANDBY-ON
RECORD
MC-30 MICRO SYSTEM
iR
FWD á/ë
REW à /í
PRESET
STOP PLAY•PAUSE
Tuning to radio stations
1Select TUNER source.
➜TUNER is displayed briefly.
2Press BAND once or more to select your
waveband.
3Press down on TUNING 4 or 3 and release
button.
➜The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
➜If a FM station is received in stereo, STEREO is
shown.
4Repeat step 3 if necessary until you find the
desired station.
¶To tune to a weak station, press TUNING 4 or
3briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only program
stations which are not in the memory already.
1Press PRESET 4 or 3 ( ¡ or ™ on the
remote control) to select the preset number
where programming should start.
Note:
–If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2Press PROGRAM on the system or remote
control for more than 2 seconds to activate
programming.
➜AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by AM. The last preset
automatically stored will then be played.
Manual programming
1Tune to your desired station (see Tuning to radio
stations).
2Press PROGRAM on the system or remote
control to activate programming.
➜PROGRAM flashes in the display.
3Press PRESET 4 or 3 (¡ or ™ on the remote
control) to allocate a number from 1 to 40 to
this station.
4Press PROGRAM again to confirm the setting.
➜PROGRAM disappears, the preset number and
the frequency of the preset station are shown.
5Repeat the above four steps to store other
stations.
¶You can override a preset station by storing
another frequency in its place.
Tuning to preset stations
¶Press PRESET 4 or 3 ( ¡ or ™ on the
remote control) until the desired preset station
is displayed.
pg 001-021/MC30/37-Eng 12/8/00, 9:09 AM15