Tandberg Data Viking FS-412, Viking FS-1600 manual Setup Completion, Enabling Telnet Server

Tandberg DataSetting Up & Administration

__________________________________________________________________________________________________

2.2.1.Enabling Telnet Server

The Telnet Server service needs to be enabled prior to its access. The service can be enabled by opening the services MMC:

1.Select Start > Run, and then enter services.msc.

2.Locate and right-click the Telnet service and then select Properties.

3.Choose one of the following:

oFor the Telnet service to start up automatically on every reboot, in the Startup Type drop-down box, click Automatic, and then click OK.

oFor the Telnet service to be started manually on every reboot, in the Startup Type drop-down box, click Manual, and then click OK.

On the storage server, access the command line interface, either by Remote Desktop or a direct connection, and then enter the following command:

net start tlntsvr

The sessions screen provides the ability to view or terminate active sessions.

2.3.Setup Completion

After the NAS appliance is physically set up and the basic configuration is established, additional setup steps must be completed. Depending on the deployment scenario of the NAS appliance, these steps may vary.

Additional setup steps may include:

•Managing system storage

•Creating and managing users and groups

•Creating and managing file shares

•Running Microsoft Windows Update

•Using Ethernet NIC teaming

•Installing third-party software applications

Each of these setup steps is discussed in the following sections.

2-3 Tandberg Viking Series Storage Server Administration Manual