Tandberg Data Viking FS-1600, Viking FS-1500, Viking FS-412 manual Create Virtual Disk Wizard

Tandberg DataUsing iSCSI Software Targets

__________________________________________________________________________________________________

oSelect the identifier type from the Identifier Type list and type the identifier in the Value field.

oRepeat steps b and c for each identifier you want to add.

oClick OK.

oClick OK again to close the Advanced Identifiers page.

8.Click Next.

9.Click Finish to complete the wizard and create the iSCSI Target.

9.1.5.Create Virtual Disk Wizard

This section describes how to create an iSCSI Virtual Disk using the Create Virtual Disk Wizard.

Notes

In order to create iSCSI Virtual Disks, it is required that physical disks are formatted as NTFS.

1.In the Microsoft iSCSI Software Target MMC snap-in, click the Devices node.

2.On the details view (right pane) of the Devices node, right-click a volume and select Create Virtual Disk.

9-4 Tandberg Viking Series Storage Server Administration Manual