Tandberg Data Viking FS-412, Viking FS-1600 manual Create a user map, Click List Unix Users

Tandberg DataMicrosoft Services for Network File System (MSNFS)

__________________________________________________________________________________________________

A .maphosts file with the following contents allows access by all computers except computers named rogue_host and malicious_wks:

rogue_host - malicious_wks -

+

In the next example, rogue_host is denied access even though it appears in the list without a minus sign (–) because it follows a minus sign on its own line:

R2_host UNIX_host Windows_DC NIS_host

-

rogue_host

8.6.6.3.Create a user map

The next step in setting up User Name Mapping is to create a user map that associates the Windows user name of each user to his or her UNIX user name.

To create a user map:

1.On the computer running User Name Mapping, open Microsoft Services for NFS. To open Microsoft Services for NFS, click Start, point to Administrative Tools, and then click Microsoft Services for Network File System.

2.In the console tree, expand User Name Mapping, right-click User Maps, and then click Create Map.

3.In the Windows domain list, click the domain for which you want to map user names, and then click List Windows Users.

4.If you are obtaining information about UNIX user names from an NIS server, type the NIS domain name in NIS domain name. If the NIS server is in a different subnet than the User Name Mapping server, type the DNS name or IP address of the NIS server in NIS server name. Otherwise, leave the NIS Server name box blank.

5.Click List UNIX Users.

6.In the Windows Users list, click the user name to map.

7.In the UNIX Users list, click the corresponding user name to map and click Add.

8.Repeat steps 6 and 7 for each user account to map and click Apply.

8-11 Tandberg Viking Series Storage Server Administration Manual