Tandberg Data Viking FS-412 manual Create a Replication Group for Collection Purposes, 7-26

Tandberg DataDistributed File System

__________________________________________________________________________________________________

Next, review the namespace path listed in the Replicated Folders tab, which should look similar to the following figure.

You can see that the LOB Data replicated folder is published in a namespace but the Antivirus Signatures replicated folder is not. To access the LOB Data folder in the namespace, in the Run dialog box, type \\server_or_domain\Public\Software\LOB Data.

Notes

If you want to stop publishing the LOB Data replicated folder in the namespace, you can right-click the replicated folder and then click Remove from Namespace.

7.6.4.Create a Replication Group for Collection Purposes

In this task, assume that you have a hub server in a central hub or data center location and a branch server in a remote office. The branch server contains folders named Projects and Proposals that are very important to the branch office, but there is a concern that the backups performed at the branch office are performed incorrectly. You want to back up the Projects and Proposals folders from the data center to ensure that the backups are successful.

To accomplish this goal, you will set up a replication group for data collection purposes. This type of replication group consists of two members and one replicated folder for each folder that you want to back up from the hub server at the data center. The permissions that are set on the replicated folders on the branch server will be applied to the replicated folders on the hub server. You specify a single folder on the hub server under which subfolders for the replicated folders will be created. This allows you to back up multiple replicated folders from a single location on the hub server.

7-26 Tandberg Viking Series Storage Server Administration Manual