Tandberg Data Viking FS-1500, Viking FS-1600, Viking FS-412 manual Import Virtual Disk Wizard

Tandberg DataUsing iSCSI Software Targets

__________________________________________________________________________________________________

3.Click Next on the Welcome page of the wizard.

4.On the File page, specify the full path to use as the virtual disk and click Next.

5.On the Size page, specify the size to use for the virtual disk and click Next. If the file already exists, you cannot specify a new size.

6.Enter a description for the iSCSI virtual disk (optional) and click Next.

7.On the Access page, click Add to assign the iSCSI virtual disk to an iSCSI Target.

8.On the Add Targets dialog box, select a Target and click OK.

9.Click Finish to complete the wizard and create the iSCSI virtual disk.

Notes

If you delete a virtual disk, it is removed from the iSCSI Software Target MMC snap- in, but the virtual disk file (.vhd) is not removed from the physical disk. In order to permanently remove the virtual disk file, locate the file on the physical disk using Windows Explorer and manually delete it.

9.1.6.Import Virtual Disk Wizard

This section describes how to import a virtual disk using the Import Virtual Disk Wizard.

1.In the Microsoft iSCSI Software Target MMC snap-in, click the Devices node.

2.On the details view (right pane) of the Devices node, right-click a volume and select Import Virtual Disk.

3.Click Next on the Welcome page of the wizard.

4.On the Files page, click Browse, navigate to the virtual disk file (.vhd) you want to import, select it, and then click OK.

5.Repeat step 4 for each virtual disk you want to import.

6.Click Next and then click Finish to complete the wizard and import the virtual disk(s).

9-5 Tandberg Viking Series Storage Server Administration Manual