Tandberg Data Viking FS-412 manual AFP Appletalk Sharing, Instaling the AppleTalk Protocol, 6-19

Tandberg DataFolder & Share Management

__________________________________________________________________________________________________

AFP (Appletalk) Sharing

AppleTalk shares can be set up only after AppleTalk Protocol and File Services for Macintosh have been installed on the NAS appliance.

Note

AppleTalk shares should not be created on clustered resources as data loss can occur due to local memory use.

Instaling the AppleTalk Protocol

To install the AppleTalk Protocol:

1.From the desktop of the NAS server, click Start, navigate to Control Panel > Network Connections > Local Area Connection. Right- click and select Properties from the pop-up menu, and then click on Install….

2.Select Protocol and click Add….

3.Select AppleTalk Protocol and click OK.

4.Click Close to finish the installation.

6-19 Tandberg Viking Series Storage Server Administration Manual