Pelco Dx8000 manual Introduction, Parts List, Tools Needed, Quantity, Description

Introduction

The following instructions serve as a guide for upgrading the storage capacity of the DX8000 Series digital video recorder (DVR). Included are step-by-step directions for installing one to three additional hard disk drives in the DX8000 using the DX8000-UP250 hard disk upgrade kit. The following illustrates how to upgrade your DVR to a four-drive system.

IMPORTANT: If this upgrade requires the replacement of the DX8000Õs primary/system hard disk drive (drive 1 nearest the CD/DVD drive), refer to the instructions for replacing the primary drive (manual number C1606M). This manual should be included with this upgrade kit if a primary drive replacement is necessary.

PARTS LIST

NOTE: This upgrade kit includes one or more Pelco-certified hard disk drives. Using any other hard disk drives with the DX8000 voids the manufacturerÕs warranty for this product.

Quantity	Description
1 to 4	250 GB hard disk drive(s)
1 or 2	80-pin straight IDE data cable(s)
2 or 4	Mounting screws

1DX8000-EXD IDE extender card (manual, driver diskette, and hold-down bracket)

TOOLS NEEDED

1Phillips-head screwdriver #1 (nonmagnetic)

1Properly grounded ESD wrist strap and mat

4 Small containers for storing screws (optional)

C1609M (6/04) 1