Pelco Dx8000 manual Reconnect Data And Power Cables, C1609M 6/04

RECONNECT DATA AND POWER CABLES

IMPORTANT: Data and power connectors fit together only one way. All connectors are keyed to ensure that they are inserted in the proper orientation. Examine the drive, motherboard and cable connectors before installation so that connectors are properly aligned. Make sure connectors are seated in the mating connectors securely, but do not force the connection. When installing drive power cables, push the connectors straight in or out; do not rock connectors back and forth.

1.Connect the CD-RW drive to the system DX8000-EXD IDE extender card using the data cable that came with your DX8000:

a.Connect the black connector of the data cable that came with your DX8000 to the CD-RW drive as illustrated in Figure 20.

b.Connect the blue connector of the data cable to IDE connector labeled IDE1 on the DX8000-EXD extender card. This is the IDE connector that is closest to the front of the DVR. Refer to Figure 20.

22 C1609M (6/04)