Tandberg Data Viking FS-1500 Add mapsvc.exe to the exception list, Microsoft Services for, Port

Tandberg DataMicrosoft Services for Network File System (MSNFS)

__________________________________________________________________________________________________

To open ports in Windows Firewall:

1.On a computer running the User Name Mapping service or Server for NFS, click Start, click Run, type firewall.cpl, and then click OK.

2.Click the Exceptions tab, and then click Add Port.

3.In Name, type the name of a port to open, as listed in the following table.

4.In Port number, type the corresponding port number.

5.Select TCP or UDP and click OK.

6.Repeat steps 2 through 5 for each port to open, and then click OK when finished

Notes

Depending on your requirements, you may need to open Transmission Control Protocol (TCP) ports, User Datagram Protocol (UDP) ports, or both TCP ports and UDP ports. For testing purposes, we recommend that you open both TCP and UDP transports for all protocols.

Microsoft Services for	Port to open
NFS component
User Name Mapping	Portmapper
and Server for NFS
Server for NFS	Network Status Manager
Server for NFS	Network Lock Manager
Server for NFS	NFS Mount
Server for NFS	Network File System

Protocol

TCP, UDP

TCP, UDP

TCP, UDP

TCP, UDP

TCP, UDP

Port

111

1039

1047

1048

2049

8.6.10.2.Add mapsvc.exe to the exception list

On the computer running User Name Mapping, you must add the Mapsvc.exe program to the Windows Firewall exception list.

To add Mapsvc.exe to the exception list:

1.On the computer running the User Name Mapping service, click Start, click Run, type firewall.cpl, and then click OK.

2.Click the Exceptions tab, and then click Add Program.

3.Click Browse, click mapsvc.exe, and then click Open. By default, this file is located in %windir%\System32.

4.Fore testing purposes, click Change scope, select Any computer, and then click OK.

8-16 Tandberg Viking Series Storage Server Administration Manual