Tandberg Data Viking FS-1600 Telnet Server, Tandberg DataRemote Access Methods & Monitoring, 10-2

Tandberg DataRemote Access Methods & Monitoring

__________________________________________________________________________________________________

10.2. Telnet Server

Telnet Server is a utility that lets users connect to machines, log on, and obtain a command prompt remotely. Telnet Server is preinstalled on the NAS server, but must be activated before use.

Caution

For security reasons, the Telnet Server service must be restarted each time the server is restarted.

Telnet Server can be enabled by using a Remote Desktop session or direct attached method to access a command line interface and enter the following command:

net start tlntsvr

The Telnet Server service needs to be enabled prior to running this command. The service can be enabled by opening the services MMC:

1.Select Start, Run, then type services.msc.

2.Locate the Telnet service, right-click on it, then select Properties.

3.In the startup type drop-down box, choose Manual, and click OK.

Note

The sessions screen provides the ability to view or terminate active sessions.

10-2 Tandberg Viking Series Storage Server Administration Manual