Nextbook NEXT3 warranty Charging Battery, Installing Memory Card, Transferring Files

Rear View

i.Reset pin hole – reset your device if the device freezes.

j. Built-in Speakers

j j i

Charging Battery

The device has a built-in rechargeable battery. No extra battery installation is required. Just charge the device when it indicates low battery.

To charge the battery, connect the device to any standard wall outlet via the DC-IN port using the power adaptor. It takes about 5 hours to fully charge the battery.

Note:

a.You can operate the device even when it is being charged. But for extended battery life, it is suggested NOT to use the device when it is charging.

b.It is recommended to charge the battery before you use the device for the first time.

c.For maximum performance, lithium-ion batteries need to be used often. If you don’tuse the device often, be sure to recharge the battery at least once per month.

Installing Memory Card

This device can read files directly from memory card.

To use a memory card, find the card slot at the bottom of the device and then insert the memory card into the slot in the correct orientation. To access the files stored in the memory card, enter the Explorer mode by tapping the Explorer icon and select the “SD Card”directory.

Transferring Files

Before reading or playing files, you need to transfer media files from a computer to the device.

(1)Connect the device to a computer with the supplied USB cable.

(2)Once connected, two removable disk drives will show on your computer. One represents the internal memory of the device, and the other represents the memory card inserted into the device. Now you can copy files from or to these disk drives just as you would on your hard drive.

(3)Once the data transfer completes, drag from the top bar downwards to display the

6