Quick Start

Save icon

To Monitor Conditions In Connected Receivers

	From Monitor Mode, click on the Play icon (the far left icon) in the Transport Tool Bar. All RF
	and AF Level meters in the Monitor screen are now active and show continuous changes in
Transport Tool Bar icons	RF and AF levels.
Transport Tool Bar icons

To Change Conditions in Connected Receivers

Double-click on any parameter you wish to change, or use the Setup menu Channel option to open the Channel Setup dialog (see page 10 in this manual for more information). Select the appropriate receiver tab(s), then the field(s) you wish to change, then click on OK. WSM will instantly send all changed parameter(s) to your connected receivers.

To Record Data

Click on the Record icon (the far right icon) in the Transport Tool Bar. Changes in all RF and AF levels in all connected receivers are now being recorded by WSM. To momentarily pause recording, click on the Pause icon (the second from right icon) in the Transport Tool Bar. To conclude recording, click on the Stop icon (the second from left icon) in the Transport Tool Bar.

To View Recorded Data

Time Domain

Mode icon

Go to Time Domain Mode, either by selecting it from the Window menu, or by clicking on the Time Domain icon in the Tool Bar. To determine which parameters you wish to see graphed out, select “Drawing Condition” from the Settings menu, or click on the Drawing Condition icon in the Tool Bar. In the resulting dialog, select the appropriate receiver tab(s), then check the data type(s) you wish to view (RF Level A, RF Level B, RF Level A+B, and/or AF Level), then click on OK. The selected data for the chosen receiver will be graphed onscreen. Each parameter is shown in a different color, as described in the onscreen legend at the upper right-hand corner of the screen.

Drawing

Condition icon

Monitor Mode

icon

To Save Recorded Data

Return to Monitor Mode, either by selecting it from the Window menu, or by clicking on the Monitor Mode icon in the Tool Bar. Click on the Save icon in the Tool Bar or, from the File menu, select the “Save” or “Save As” option (the latter allows you to assign a new filename). A standard Windows dialog follows, which allows you to save all recorded data to a file on disk (the suffix “.WSM” will automatically be appended to all such files).

Load icon

To Load A File

From Monitor Mode, click on the Load icon in the Tool Bar or, from the File menu, select the “Load” option. A standard Windows dialog follows, which allows you to load any “.WSM” file from disk.

New icon

To Start A New WSM Session

From Monitor Mode, click on the New icon in the Tool Bar or, from the File menu, select the “New” option. Connected receivers will be unaffected, but all data in memory will be cleared.