Samson Wireless System Manager for Windows 95 owner manual Simple Monitor Screen

Page 13

The Simple Monitor Screen

When in Monitor Mode, the WSM screen shows a lot of information—so much, in fact, that there may be times when you want a simpler screen display with less data and larger meters (for example, when your computer monitor is a distance away from your working position). For this reason, WSM provides an alternative Monitor screen, called, appropriately enough, the Simple Monitor screen (shown below).

All screen functions are the same as in the Monitor screen, except that there is a single RF Level meter for each receiver. This meter shows the RF signal strength being received by the antenna currently in use, and the legend beside it shows whether the “A” or “B” antenna is the current one. In addition, there are fewer items in the Status Display; only Audio Frequency (Rx AF) on/off and Mute on/off are shown (as in the Monitor screen, when Mute is on, the box is colored red).

To call up this screen, either select the Simple Monitor Screen option from the Setup menu (see page 13 in this manual for more information), or click on the Simple Monitor Screen icon in the Tool Bar, shown in the illustration on the right. For more information on the WSM Tool Bar, see page 12 in this manual.

Simple Monitor

icon

11

Image 13
Contents Wireless System Manager for Windows Table of Contents Introduction Introduction / Hardware InterconnectionsHardware Interconnections Hardware Interconnections Hardware Interconnections Hardware Interconnections Software Installation Software Installation Launching WSM Quick Start To Create a Channel Plan To Perform An RF Spectrum AnalysisTo Get Help To Quit WSMMonitor Mode Simple Monitor Screen Monitor Mode Tool Bar Monitor Mode Menus Time Domain Mode Spectrum Analyze Mode Time Domain Mode / Spectrum Analyze ModeSpectrum Analyze Mode FCC Rules and Regulations