Tank Initialization:
The tank screens are used to set up the tanks in the system. Each tank is assigned a number and a starting quantity level in the desired unit of measure. The following is the process for installing a tank:
•Maximum of 8 Tanks
•Tank ID’s are numbered 1 thru 8
•Tank unit of measure can be quarts, liters, pints or gallons
•By default, the unit of measure is liters
•Set the dispensing unit of measure to the proper value
•The tank stock level setting is updated after each dispense from the associated tank.
•The tank stock level quantity setting Format is 5.3 digits (99999.999)
•The remaining tank stock level quantity will be printed out to the nearest whole number after each dispense on the ticket.
•The Supervisor may update the tank stock level quantity setting at any time by entering these screens to change stock levels
Tank Unit
Tank No -
Active keys:
Numeric keys, 
, 
, 
Action:
•Enter key with no entry jumps to Fluids Screens Enter a numeric value from 1 to 8 and press 
Tank Unit
LITERS
Active keys:
Numeric keys, 
, 
, 
, 
Use 
to select between LITERS, GALLONS, PINTS, QUARTS and
REMOVE (REMOVE option will delete the tank from the system.)
Press 
to move to the next screen.
Samson