Color Menu, Contrast and Brightness Control

CONTROLS AND ADJUSTMENTS

"Color" Menu
	Color		Color
Mode 1	62	Mode 1	52
Mode 2		Mode 2
Mode 3	68	Mode 3	51
Mode 4		Mode 4
9300°K	62	7500°K	61

Mode 1

Mode 2

	Color
Mode 1	50
Mode 2
Mode 3	50
Mode 4
6500°K	50

Mode 3

Color
Mode 1	58
Mode 2
Mode 3	47
Mode 4
5000°K	23

Mode 4

English

a.By pressing the "Color" key you can select between mode 1, 2, 3 or 4 to store your user defined color settings.

b.Press the "▼" or "▲" key to select the R/G/B gain, then press the "+" key to increase or press the "–" key to decrease the respective color intensity.

Contrast and Brightness Control

:50

:100

When the OSD menu is switched off, proceed as follows to adjust the contrast or brightness:

a.Press the "+" or "–" key to increase or decrease the contrast level of the screen.

b.Press the "▲" or "▼" key to increase or decrease the brightness level.

BNC/D15 / Exit Switch

a. BNC/D15 selection

• While the OSD window is not displayed.

• Select the BNC/D15 by pressing the key. b. Exit Switch

Energy Declaration

• You can turn off the OSD window by pressing this key.

This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which also supports the VESA DPMS standard to fulfill the requirements of the NUTEK specification 803299/ 94/96. The time settings for switching to a power saving mode are adjusted from the system unit by software. From the first indication of inactivity to power saving position A2 the total time must not be set to more than 70 minutes.

1. VESA Power-Management Proposal

2. Power Consumption (120/230 Vac)

VESA DPMS Standard

H. sync	V. sync	Video	State

Off	On	Blank	Stand-by
On	Off	Blank	Suspend

Off	Off	Blank	Off

NUTEK	VESA state	LED indicator	Power
NUTEK	VESA state	LED indicator	Consumption
			Consumption

Normal	On	Green	<110W
operation	On	Green	<110W
operation

Power Saving	Suspend	Amber	<15W
Position A1	Suspend	Amber	<15W
Position A1

Power Saving	Off	Amber	<8W
Position A2	Off	Amber	<8W
Position A2

According to TCO guidelines, the optimum TCO readings are measured when brightness and contrast are adjusted to their center position.

♦♦♦