Installing or Removing the Tilt/Swivel Base

INTRODUCTION

Installing or Removing the Tilt/Swivel Base

1.Turn off the system and all attached peripherals.

2. Carefully set the monitor upside down.

Remove the Tilt/Swivel Base:

1. Squeeze and hold the latches.

2. Pull the tilt/swivel base to the rear of the monitor and lift to remove the base.

Installing the Tilt/Swivel Base:

Install

Remove

1.Align the base with the slots on the bot-

tom of the monitor and insert the tilt/swivel base into the slots.

2.Push the tilt/swivel base firmly toward the front of the monitor until the latches click into the locked position.

Feature Highlights

Maximum Compatibility

•Automatically scans all horizontal frequencies between 30kHz and 95kHz, and all vertical frequencies between 50 Hz and 160 Hz.

•Supports multiple operating platforms such as IBM compatible PC's or Macintosh computers (with optional adapter).

•Multiple graphic standards with high refresh rates:

640 x 480/160Hz, 800 x 600/147Hz, 1024 x 768/117Hz, 1280 x 1024/ 85Hz, 1600 x 1200/75Hz.

•Supports wide range of graphics standards including VGA, Super VGA, 8514/ A, XGA, Mac II 13" (640 x 480), Mac 16" (832 x 624), Mac 21" (1152 x 870), as well as all VESA standards.

Latest Screen Technology

•0.25 mm Aperture Grille 17" CRT (43.1 cm) for maximum clarity and detailed pictures.

•Special anti-reflection, anti-glare and anti-static coating of the screen face provides better focus, contrast and color performance.

•Cylindrical screen reduces image distortion and glare.

•Full feature digital control and multi-lingual OSD system allows easy adjustment of geometry and color. Furthermore the monitor provides even advanced adjustments like trapezoid, parallelogram, side-pin, pin-balance, convergence and rotation which allow the user to fine-tune the screen image.

English

♦♦♦