Sony NSP-100 manual For the customers in the USA, For the customers in Europe

Page 2

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Caution

·When using a LAN cable: For safety, do not connect to a connector for peripheral device wiring that might have excessive voltage.

·Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer's instructions.

IMPORTANT

The nameplate is located on the bottom.

For the customers in the USA

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For the customers in Europe

This product with the CE marking complies with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.

Compliance with these directives implies conformity to the following European standards:

·EN60950: Product Safety

·EN55103-1: Electromagnetic Interference (Emission)

·EN55103-2: Electromagnetic Susceptibility (Immunity)

This product is intended for use in the following Electromagnetic Environment (s):

E1 (residential), E2 (commercial and light industrial),

E3 (urban outdoors) and E4 (controlled EMC environment ex. TV studio).

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Network Player For the customers in the USA For the customers in EuropeTable of Contents Features High Image QualityNames and Functions of Parts Main Unit Front Panel and Left SideMain Unit Rear Panel Remote Controller While playback is paused Pressing this button ENTER/b, B, v, V controlStop button Replacing the Battery Remote Controller PreparationsMain Unit DIP Switch and Remote Controller Settings PreparationsStarting Up and Initial Settings To return to the previous screenTo exit the Menu screen Alarm indicationsDisplaying the Menu Screen Play button playback Automatic playback at power onPlaying a Playlist To stop during playbackTo change Playing a Movie FileDisplaying a Still Image File When a password has been set Deleting an Unwanted PlaylistDeleting Unwanted Movie and Still Image Files To exit the Setup screen Displaying the Setup ScreenSetting the System Date and Time Making the Store Playout Log Setting Making the Delete Confirmation SettingMaking the Display During Break Setting To remove an existing setting Carrying Out Playout Mode Setup PlaylistsCarrying Out Screen Adjustment To cancel the adjustment and exit the menu screen System Administrator SetupAdjustment procedure When a password has been setSettings selected in the System Administrator Setup screen Carrying Out Network SetupCarrying Out RS-232C Setup Setting Menu Language Carrying Out Delete All Data Carrying Out Password SetupActivating Automatic Delete To correct an entryTo cancel the password Connecting the Power Examples of System ConnectionPage Precautions Alarm IndicationsOthers SpecificationsAudio outputs Sony Corporation
Related manuals
Manual 29 pages 43.38 Kb
Top Page Image Contents