To use PC card slot
Your computer has a card bus PC card slot that supports Type I or Type II PC (PCMCIA) cards. You do not need to shut down your computer when inserting a PC card. For more information, see the instructions supplied with your PC card.
Inserting a PC card
1.Insert the PC card into the PC card slot until it clicks into position.
Inserting a PC card
2.If the PC Card does not insert easily, remove it from the PC card slot and verify that it is not
Removing a PC card
1.
2.Click to select the name of the card that you want to eject and click Stop. The Stop a Hardware Device window appears.
3.Click OK.
4.When the message "Safe to Remove Hardware" appears, push the PC card Eject button on the front panel of the system unit. You may need to extend the Eject button out from the computer before you can eject the card.
5.When the PC card ejects from the PC card slot, remove it by holding the edges and pulling it out carefully.
Note:
If you eject the PC card incorrectly, your computer may not work correctly.
Page 29