Connecting the stereo speakers
Your computer system is supplied with speaker wires (2) to connect the stereo speakers to the terminals on the system unit. At the ends of each speaker wire are two wire leads, one with
To connect the speaker wires to the computer
1.Press and hold the black tab on the lower
2.Insert the
Connecting the speakers to the computer
3.Press and hold the red tab on the upper
4.Using the same speaker wire, insert the other lead into the upper
5.Repeat the above steps to connect the left speaker to the computer.
To connect the speaker cables to the speakers
1.Press and hold the left, black tab on the back of the speaker. Insert the
2.Press and hold the right, red tab on the back of the speaker. Insert the other lead of the same speaker wire into the terminal. Release the red tab and gently pull on the wire to set the lead firmly.
Connecting the speaker cable to the speakers
Page 34