Emotiva MPS-1 manual Received

Page 23

12V Trigger Connections

The 12 VDC trigger connection shown can be used to turn the amplifier on when the preamplifier turns on. This trigger will actually trigger with any switched DC Voltage from 5-24 VDC, however the majority of home theater components use a standard 12 VDC trigger connection for this function. This is the preferred con- nection as it has the greatest degree of reliability.

Never switch anything that plugs directly into the wall with this trigger connection. This action will damage the unit and VOID THE WARRANTY.

If unable to use the trigger connection to activate the MPS-1, you could alternatively use the amplifier’s SIGNAL switch position. The amplifier will then au- tomatically turn on when a preamp audio signal is

received.

The trigger connection plug and turn-on selector

 

switch are located on the top right corner of the back

 

of the MPS-1 chassis

Speaker Output Connections

The speaker output terminals for each amplifier channel are located just below the balanced XLR input jack. The top post of each binding post pair is the positive output, and connects to the positive (red) post of your speaker. The bottom post of each pair is the negative, and connects to the negative (black) post of your speaker.

Regardless of the configuration used for the MPS- 1 amplifier channels, proper connection of each speaker is essential. The 5-way binding posts can accept bare wire, spade terminals, and dual or single banana connectors. Spade connections or banana plugs ensure a simple, solid fit in the ter- minal whereas bare wire may be awkward when the terminal is screwed down to compress the wire into place. Keep in mind that if you use “dual banana” plugs and“stack”them, you will be creating a paral- lel connection.

Spade connections ensure a tidy and safe connection

to each speaker output binding post.

Page 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents USER’S Guide Page Table of Contents Service Assistance for the MPS-1 Emotiva Disclosure Connection Tips for Superior Sound Connection DiagramsPage Safety Precautions Page NEC National Electrical Code Standards Dear Home Entertainment Enthusiast Thank You for your MPS-1 PurchaseSerial Number Place of Purchase Date of Purchase Unpacking the MPS-1Recording the Serial Number MPS-1Modular Professional Power Amplifier Features Emotiva MPS-1 Modular Power AmplifierPanel Dim Selector Button MPS-1 Front Panel FeaturesPower Button Amplifier Channel Display Balanced XLR Inputs MPS-1 Finished Rear Panel LayoutUnbalanced RCA Inputs Speaker Output Terminals Connection External TriggerTools Required Installation and ConnectionsInstallation of the EPM-300 Power Modules Module bay For proper installation of the power module, Piano Black Wood Side Panels MPS-1 Installation AccessoriesOutput Connection Considerations AC Power ConsiderationsInput Connection Considerations Connection Tips for Superior Sound Automatic Operation of the Cooling FansUnbalanced Connections Connection DiagramsBalanced Connections Received Series Series and Parallel Speaker ConnectionsAn example of a Parallel Connection between two speakers Tips Before You Begin Speaker Placement TipsFront Speakers Place each surround speaker to be an equal Surround Back Speakers Play a test Tone or low bass music No Sound from one or more speakers connected to the MPS-1 Troubleshooting GuideTurn-on and turn-off thumps Other Probable Causes of Noise Technical Specifications Emotiva Limited WarrantyService Assistance for the MPS-1 Emotiva Disclosure Franklin, TN

MPS-1 specifications

The Emotiva MPS-1 is a powerful and versatile multi-channel amplifier designed to enhance audio performance in both home theaters and high-fidelity music systems. Known for its robust construction and high-quality sound output, the MPS-1 stands out as an ideal choice for audiophiles and home theater enthusiasts alike.

One of the defining features of the MPS-1 is its impressive power output. The amplifier delivers 200 watts per channel into 8 ohms and 300 watts into 4 ohms, providing ample headroom to drive even the most demanding speakers. This high power output ensures that users can enjoy dynamic sound without compromising on clarity or detail, making it suitable for both movies and music.

The MPS-1 utilizes advanced Class AB amplification technology, combining the efficiency of Class A with the thermal performance of Class B. This design minimizes distortion and maximizes linearity, ensuring that the sound remains clean and accurate across a wide frequency range. The amplifier also features a high-current output stage, allowing it to handle sudden peaks in audio without clipping, an essential quality for impactful sound reproduction.

Another significant aspect of the MPS-1 is its comprehensive connectivity options. It is equipped with both balanced XLR and unbalanced RCA inputs, providing flexibility for integration into various audio setups. The amplifier can also be configured to operate in a bridged mode, effectively doubling the output power to drive larger speaker setups or subwoofers, which enhances its versatility in custom installations.

In terms of build quality, the MPS-1 showcases Emotiva's commitment to durability. The amplifier features a heavy-duty steel chassis designed to minimize interference from external sources, while the high-quality components used in its construction—such as powerful power supplies and premium capacitors—ensure longevity and reliability.

The MPS-1 also incorporates intelligent thermal management features, including heat sinks and a built-in fan that operates only when necessary, keeping the unit cool during extended use without introducing unwanted noise.

Overall, the Emotiva MPS-1 represents a compelling choice for those seeking a high-performance multi-channel amplifier that combines power, flexibility, and exceptional audio fidelity, making it a worthy addition to any serious sound system.
Top Page Image Contents