Emotiva MPS-1 manual Front Speakers, Center Speaker

Page 27

Place LEFT, CENTER, and RIGHT main

speakers at equal distances from the

listening position.

The Front Speakers

You should closely follow the placement recommendations of your speaker manufacturer, with the addition of the fol- lowing points:

•The left and right front speakers should be positioned so that your TV is exactly centered between them. This will help focus your attention towards the screen.

•For the best overall imaging, the left speaker should be set exactly the same distance and angle away from your listening position as the right speaker. It is recommended that you use a tape measure to set them up to be the same distance away, within about half an inch tolerance.

If you have a smaller TV, the speakers should be no more than two feet away from the sides of the TV. If possible, have the center, left and right speakers at the same height (within two feet). This will help give a smooth transition when sound effects move from speaker to speaker.

Ideally, the speakers should be no closer than two feet from the rear and side walls, in order to reduce any reflections that might upset the imaging. If your speakers are closer than this, you can experi- ment by adding sound deadening material such as drapes on the walls to reduce any unwanted reflections.

Whenever possible, place the center

speaker no more than 12” (25.4cm) above

or below the front speakers

The Center Speaker

Most movie dialog will come from the center speaker, so careful positioning is an important part of a good home theater system. Your eyes and ears should focus your at- tention towards the center of the screen.

The center speaker can sit on top, or directly underneath the TV, as long as it is located on the centerline and not off to one side. Ideally you would try to maintain a deviation from the center line of the speakers of less than 12”. This means the center speaker will not be lower or higher than 12”to the center measurement of the LEFT and RIGHT MAIN speaker center measurements.

Position the front face of the speaker close to the front edge of the TV cabinet. (The sound waves may otherwise reflect off the top of the TV cabinet and distort the center imaging).

In some systems, two center speakers are used; one on either side of the TV. As they are in mono, the result is a sound image that is positioned exactly at the screen center.

Page 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents USER’S Guide Page Table of Contents Service Assistance for the MPS-1 Emotiva Disclosure Connection Tips for Superior Sound Connection DiagramsPage Safety Precautions Page NEC National Electrical Code Standards Dear Home Entertainment Enthusiast Thank You for your MPS-1 PurchaseSerial Number Place of Purchase Date of Purchase Unpacking the MPS-1Recording the Serial Number MPS-1Modular Professional Power Amplifier Features Emotiva MPS-1 Modular Power AmplifierMPS-1 Front Panel Features Power Button Amplifier Channel DisplayPanel Dim Selector Button MPS-1 Finished Rear Panel Layout Unbalanced RCA Inputs Speaker Output TerminalsBalanced XLR Inputs Connection External TriggerInstallation and Connections Installation of the EPM-300 Power ModulesTools Required Module bay For proper installation of the power module, Piano Black Wood Side Panels MPS-1 Installation AccessoriesAC Power Considerations Input Connection ConsiderationsOutput Connection Considerations Connection Tips for Superior Sound Automatic Operation of the Cooling FansUnbalanced Connections Connection DiagramsBalanced Connections Received Series Series and Parallel Speaker ConnectionsAn example of a Parallel Connection between two speakers Tips Before You Begin Speaker Placement TipsFront Speakers Place each surround speaker to be an equal Surround Back Speakers Play a test Tone or low bass music No Sound from one or more speakers connected to the MPS-1 Troubleshooting GuideTurn-on and turn-off thumps Other Probable Causes of Noise Technical Specifications Limited Warranty Service Assistance for the MPS-1Emotiva Emotiva Disclosure Franklin, TN

MPS-1 specifications

The Emotiva MPS-1 is a powerful and versatile multi-channel amplifier designed to enhance audio performance in both home theaters and high-fidelity music systems. Known for its robust construction and high-quality sound output, the MPS-1 stands out as an ideal choice for audiophiles and home theater enthusiasts alike.

One of the defining features of the MPS-1 is its impressive power output. The amplifier delivers 200 watts per channel into 8 ohms and 300 watts into 4 ohms, providing ample headroom to drive even the most demanding speakers. This high power output ensures that users can enjoy dynamic sound without compromising on clarity or detail, making it suitable for both movies and music.

The MPS-1 utilizes advanced Class AB amplification technology, combining the efficiency of Class A with the thermal performance of Class B. This design minimizes distortion and maximizes linearity, ensuring that the sound remains clean and accurate across a wide frequency range. The amplifier also features a high-current output stage, allowing it to handle sudden peaks in audio without clipping, an essential quality for impactful sound reproduction.

Another significant aspect of the MPS-1 is its comprehensive connectivity options. It is equipped with both balanced XLR and unbalanced RCA inputs, providing flexibility for integration into various audio setups. The amplifier can also be configured to operate in a bridged mode, effectively doubling the output power to drive larger speaker setups or subwoofers, which enhances its versatility in custom installations.

In terms of build quality, the MPS-1 showcases Emotiva's commitment to durability. The amplifier features a heavy-duty steel chassis designed to minimize interference from external sources, while the high-quality components used in its construction—such as powerful power supplies and premium capacitors—ensure longevity and reliability.

The MPS-1 also incorporates intelligent thermal management features, including heat sinks and a built-in fan that operates only when necessary, keeping the unit cool during extended use without introducing unwanted noise.

Overall, the Emotiva MPS-1 represents a compelling choice for those seeking a high-performance multi-channel amplifier that combines power, flexibility, and exceptional audio fidelity, making it a worthy addition to any serious sound system.
Top Page Image Contents