VAIO® User Guide
Presetting i.LINK® devices
You can preset your
✍i.LINK is a trademark of Sony used only to designate that a product contains an IEEE1394 connector. All products with an i.LINK connector may not communicate with each other.
To preset your i.LINK device to perform a desired function
1From the Start menu, select Programs > VAIO Action Setup > VAIO Action Setup.
2Click i.LINK.
3Click the Advanced Setting tab.
4Click the Enable i.LINK launcher function checkbox and click Apply.
5Connect the device to your computer with your i.LINK cable.
6Turn on the device.
The VAIO Action Setup dialog box appears.
7Click OK.
8To modify the device name, click the current device name in the list box and click Modify device name.
9Type the desired name and click Apply.
10To assign an application, click Modify. The Select Application dialog box appears.
11Select the desired application and click Next.
12Click Next to confirm the application name.
The Input Application Name dialog box appears. You may change the name and description of the application you want to launch.
13Click Finish to complete this step.
The next time the device is connected and turned on, the assigned application will launch automatically.
18