Sony KP-61SV70C, KP-53SV70C, KP-43T70C service manual Watching Two Programs at One Time PIP

Using Your New Projection TV (continued)

Using the White Labeled Buttons for Projection TV Operations

CCPress repeatedly to scroll through available displays:

XDS (Extended Data Service)

Displays a network name, program name, program type, program length, program description, call letters and time of the show if the broadcaster offers this service.

Caption Vision

Displayed on the screen if the broadcaster offers this service. (see “Caption Vision” on page 28)

No display

“Off” appears and the display is canceled.

SLEEP	Press repeatedly until the projection TV displays the approximate time in
	minutes (30, 60, or 90) that you want the projection TV to remain on before
	shutting off automatically.
	Cancel by pressing until “Sleep Off” appears.
ANT	Press to change between the VHF/UHF input and the AUX input. (for
	detailed connection information, see “Cable and antenna” or “Cable box and
(AUX input)
	cable” on page 5)
MTS/SAP	Press to scroll through the Multi-channel TV Sound (MTS) options:
	Estéreo, SAP, Mono and SAP auto. (see “MTS/SAP” on page 21)
	Press to select an audio option:
	Simulado, Surround, BBE and No. (see “Efecto” on page 21)
TV/VTR	Press when you are finished using a VCR and you want to switch to the TV
	input. The VCR power will remain on.
SYSTEM OFF	Press to turn off the projection TV and all other Sony equipment.

1 6

REFER TO THE ILLUSTRATIONOFTHE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEWTHISCHART

Watching Two Programs at One Time — PIP

The Picture-in-Picture (PIP) feature allows you to view two channels simultaneously, one in the full size “main” picture and one in a smaller “window” picture.

You can move the window picture to any location on the screen.

The symbol “ b” or “ B”	The symbol “ ³”
indicates which picture's	indicates which
TV channel or input	picture's sound is being
source can be changed.	received.

Using the Yellow Labeled Buttons for PIP Operations

	Press to display a window picture.
PIP	Each time you press this button, the picture size will change
	(1/9 n1/16 nno display).
	To close the window picture, press PIP repeatedly until it disappears.
POSITION	Press POSITION repeatedly to change the location of the window picture
	(counterclockwise) around the main picture.
or	You can also change the location by pressing the V, v, Bor bbutton.
	The window picture moves in the direction of the arrow indicated on the

Main picture

6

10

Window picture

TV channel or input- source mode for the main picture* (yellow- green-colored)

TV channel or input- source mode for the window picture* (white-colored)

	pressed button.
ACTIVE	Press to select either the main or window picture in order to change the
	TV channel or video source using the white labeled buttons below. The
	symbol “b” (or “B”) will appear to indicate which picture’s channel or input
	mode can be changed.
TV/VIDEO	Press repeatedly to scroll through the available video inputs for the

* It will dim in about 3 seconds.

Tip z

If you press RESET in PIP mode, the window picture will move to the bottom right (factory-preset location).

	picture on which the symbol “b” (or “B”) is displayed. (see “TV/VIDEO” on
(white labeled	page 15)
button)

1 7

– 15 –