Sony KP-43T70C Registration Adjustment, Setup for Adjustment, SUB Deflection Adjustment Item

KP-43T70C/53SV70C/61SV70C

RM-Y906 RM-Y906 RM-Y906

3-10. REGISTRATION ADJUSTMENT

• ADJUST BUTTONS AND INDICATOR

5.	Press 6 to display the test signal (crosshatch) on the screen.
6.	Select GRN CENT(*) with the 1 and 4 keys on the remote
	commander and check that the adjustment data is now “000”

MUTING

Category up

DISPLAY

MUTING	DVD/	SAT/	POWER
	VTR	CABLE
			TV
SYSTEM		FUNCTION
OFF	DVD/VTR SAT/CABLE		TV
TV/VTR	FREEZE	SWAP	PIP
	m	N	M
	POSITION AUDIO		ACTIVE
X	z	x
	SLEEP	ANT	TV/VIDEO
PICTURE	CC	MTS/SAP	DISPLAY
MODE

TV POWER ON

Data up

(Rough adjustment) PJED mode Color change GRNnBLUnRED

both vertically and horizontally.

	(H)	(V)
GRN	000	000
CENT

	1	2	3	Data down
Adjustment item				(Rough adjustment)
	4	5	6
up				PJED mode
	7	8	9
				Test signal
Adjustment item	JUMP	0	ENTER
				crosshach+video signal
down	INDEX		GUIDE	dots+video signal
Category down	RESET		MENU	crosshach+black
	VOL		CH	dots+black

		off
	CODE SET	Mode select
" PJED "		Rough adjustment
		(Fine adjustment	)
data up/down
		TV
		ENTER

[SETUP FOR ADJUSTMENT]

•Current flow in circuit should be stable before attempting adjustment. So wait 5 minutes after turning on the TV power.

1.Set to the service mode by pressing quickly keys on the remote commander in the standby mode in the following

order:
[DISPLAY] n5 n[VOL+] n[TVÊPOWER]
Category		Adjustment item
		DATA
SERVICE
3E65	VPNT VPOS 031
0000 00 00

(SCREEN DISPLAY)

*: In the factory preset, “GRN CENT” appears on the screen first. In case of other colors “RED” or “BLU”, change color by every pressing 3 key.

7.Set VPNT 28 RON to “000”, 29 GON to “001” and 30 BON to “000” to show only the green color.

8.Change the VPNT mode to the PJE mode.

SUB DEFLECTION ADJUSTMENT ITEM
Adjustment	O : Yes	– : No
				Adjustment type
Display	Adjustment item		G		R	B
			H/V		H/V	H/V
CENT	CENT		O/O		O/O	O/O
SKEW	SKEW		O/O		O/O	O/O
SIZE	SIZE		–/–		O/O	O/O
LIN	LIN		–/–		O/–	O/–
KEY	KEY		–/–		–/O	–/O
PIN	PIN		–/O		–/O	–/O

2.Change TV mode to the video input mode.

3.Change the VPNT mode to the PJE 00 FDIS.

4.Set FDIS data to “01” to display the registration data of each spot in the fine adjustment.

PJE 00 00

FDIS

– 35 –