Sony MRW-EA7 manual Specifications, Technical Support

Page 18

Specifications

USB transfer rate

Full-speed (Up to 12 Mbps) High-speed(Up to 480 Mbps)

This high-speed transfer rate is a theoretical value for the USB standard.

Actual performance is dependent on the device.

Power requirements

4.75 V to 5.25 V DC

Current consumption

Max. 500 mA *

Access indicator

Always lit

Blinks on access

Operating environment

Temperature: 5°C to 40°C (41°F to 104°F) Humidity: 30% to 80% RH

Storage environment

Temperature: –30 °C to + 60 °C (–22 °F to +140 °F)

Humidity: No condensation

Dimensions (W × H × D)

Approx. 86 mm × 15.7 mm × 50 mm (3 3/8 inches × 5/8 inches × 2 inches) (excluding protrusions)

Mass

Approx. 57 g (2 oz.)

*Consumption may be higher when using Microdrive

Technical Support

For customers in Europe

Refer to “Sony at your service” of the

EUROPEAN GUARANTEE INFORMATION DOCUMENT or check on-line under

http://www.sony-europe.com/

18

Image 18
Contents Multi-Card Reader/Writer Safety regulations TrademarksTable of contents Package Contents OverviewSystem Requirements SD memory cards Supported MediaMemory Stick media Other memory cardsParts and Functions FrontConnecting the Reader/Writer to a Computer Start the computerUsing the Reader/ Writer Inserting a Memory CardReading and Writing Data on a Memory Card Open My ComputerInsert a memory card into the corresponding slot Removing a Memory Card Reading the Access Indicator Reader/writer Access indicator StatusDisconnecting Reader/Writer From Computer Pull the USB Cable out from computer On formatting initialization What is Memory Stick?About Memory Stick media About the size of Memory StickRestrictions on DOS mode Usage NotesOther Points to Note Media formatting Standby Operating and storage environmentsTroubleshooting Problem SolutionSpecifications Technical SupportEnd User License Agreement Important Notice