Configuring Presence Service
How to Configure Presence Service
| Command or Action | Purpose |
Step 5 |
|
|
allow watch | Allows the phone line associated with this directory number | |
|
| to be monitored by a watcher in a presence service. |
| Example: | • This command can also be configured in |
| template configuration mode and applied to one or | |
| or | more phones. The |
| over the | |
Step 6 |
|
|
end | Exits to privileged EXEC mode. | |
| Example: |
|
|
| |
| or |
|
|
| |
|
|
|
Enabling a SCCP Phone to Monitor BLF Status for
A watcher can monitor the status of lines associated with internal and external directory numbers (presentities) through the BLF
Prerequisites
•Presence must be enabled on the Cisco Unified CME router. See the “Enabling Presence for Internal Lines” section on page 888.
•A directory number must be enabled as a presentity with the allow watch command to provide BLF status notification. See the “Enabling a Directory Number to be Watched” section on page 889.
Restrictions
BLF Call-List
•Supported only on Cisco Unified IP Phone 7941G, 7941GE, 7961G, 7961GE, 7970G, and 7971GE.
BLF Speed-Dial
•Supported only on Cisco Unified IP Phone 7914, 7931, 7940, 7941G, 7941GE, 7960, 7961G, 7961GE, 7970G, and 7971GE.
Cisco Unified IP Phone 7931
•BLF status is displayed through monitor lamp only; BLF status icons are not displayed.
SUMMARY STEPS
1.enable
2.configure terminal
3.ephone
4.button
Cisco Unified Communications Manager Express System Administrator Guide
| 891 |
| |
|
|